Eminence DELTALITEII2510 10-Inch Neodymium Speaker, 8 Ohms, 250W
Product description
The 10-inch neodymium driver keeps weight to 5.2 pounds, a practical detail when choosing a speaker for a professional audio or bass-guitar setup. It has an 8-ohm impedance and a 250W power rating. Eminence recommends it for mid/high, full-range, and monitor applications. It can also be used in sealed or vented enclosures.
Tech specs
- Model: DELTALITEII2510
- Type: 10-inch neodymium speaker driver
- Power rating: 250W
- Impedance: 8 ohms
- Frequency response: 60Hz–4kHz
- Voice coil diameter: 2.5 inches
- Cone material: Paper
- Basket material: Die-cast aluminum
- Weight: 5.2 pounds
- Connectivity: Wired
- What’s included: One speaker
These details help narrow down whether the driver suits an existing build. The 8-ohm impedance and power rating are important when matching it with an amplifier, check that the amplifier supports the speaker’s load and intended power range. The listed frequency response is useful when assessing its role in a system, but the product information does not specify a recommended crossover or enclosure dimensions.
How to use it
This is a driver for installation in a speaker enclosure, rather than a complete ready-to-use speaker system. The listed applications include professional audio as a mid/high or full-range speaker, monitor use, and bass guitar amplification. For example, a builder planning a bass-guitar cabinet could compare the driver’s impedance and power rating with the amplifier and cabinet design before committing to the build.
Eminence states that the speaker works in either sealed or vented enclosures. That gives a builder more than one enclosure approach to consider, but the supplied details do not provide a cabinet volume or port dimensions. Those choices need to be worked out for the intended design instead of assumed from the driver size alone.
What you get
The package is listed as one speaker. The available information does not indicate that an enclosure, wiring, amplifier, or mounting hardware is included, so treat this as a component purchase rather than a full audio setup. Its paper cone and die-cast aluminum basket help identify the construction, while the neodymium magnet is a notable design feature for buyers comparing speaker drivers by magnet type and weight.
What to clarify
What applications is the DELTALITEII2510 intended for? The listed uses are professional audio in mid/high, full-range, or monitor roles, as well as bass-guitar amplification.
Can it be used in different enclosure types? Yes. The product information specifies sealed and vented enclosures, though it does not give cabinet sizing or port guidance.
What should you match before installation? Check the amplifier’s supported impedance and power requirements against the speaker’s 8-ohm impedance and 250W power rating. The listing does not specify a recommended crossover or enclosure design.
When it makes sense
It makes sense if you need a single 10-inch driver for a custom professional-audio or bass-guitar enclosure and want the listed 8-ohm, 250W specifications to guide system matching. Compared with buying a complete speaker cabinet, this component leaves the enclosure and system design to you. You may want to skip it if you need a finished speaker that can be used without installation, since the package is listed as one speaker rather than a complete system.