Craft Resin Crystal Clear Epoxy Resin Kit, 4 Gallon, UV-Resistant, Low-Odor

A small mold project calls for resin that pours clearly and levels across the surface. A larger creative session benefits from having more material on hand. This Craft Resin kit brings both needs together in a 4-gallon, two-part format.

Its crystal-clear, low-viscosity formula is made for projects such as art, wood finishes, jewelry, coasters, and molds. The self-leveling formula helps create a smooth, glossy surface, while UV resistance is designed to help maintain clarity.

The kit includes resin, hardener, pumps, gloves, a mixing stick, and a manual. Follow the mixing and pouring guidance for a practical starting point, whether you’re making cast pieces or coating a surface.

Pros

The 1:1 mixing ratio makes the two-part system straightforward to measure: combine equal parts resin and hardener by volume. The low-viscosity formula is suited to casting and coating, and the self-leveling finish supports a glass-like look on pieces such as jewelry, coasters, and wood projects. A recommended pour depth of 1/4 inch gives you a useful guide when planning a pour.

Buyers often highlight the clear finish, ease of use, and results in silicone molds. Feedback on bubbles and curing time is mixed, so careful measuring, steady mixing, and following the manual matter when aiming for a clean finish.

Worth noting

The full kit contains 4 gallons: 2 gallons of resin and 2 gallons of hardener. Pumps, gloves, a reusable mixing stick, and a manual are included, giving you the basic tools and instructions for preparing a batch. The formula is described as low odor, making it relevant for home studios as well as workshop projects.

This format suits makers choosing between a smaller quantity for occasional crafts and a larger kit for repeated pours or several projects. Its listed applications span casting in molds and making jewelry through to coasters, art, and wood coatings, so the same kit can support a range of creative work.

Care & maintenance

Measure equal volumes of resin and hardener, then mix slowly and steadily for 3–5 minutes. The product guidance recommends keeping both components and the workspace at 70–75°F (21–24°C). For bubble management, pour in layers no thicker than 1/4 inch, a heat torch can be used to address surface bubbles. The manufacturer describes the resin as hard to the touch at about 18 hours and fully cured after 24 hours. Allow the project to cure as directed before using the finished piece.

Questions before you buy

How much resin and hardener are in the kit? The 4-gallon set contains 2 gallons of resin and 2 gallons of hardener, mixed in equal parts by volume.

What can I make with this epoxy resin? It is intended for art, wood projects, jewelry, coasters, and mold casting. Its low-viscosity, self-leveling formula supports both casting and surface coating.

How can I reduce bubbles in a pour? Keep the materials within the recommended 70–75°F range, mix slowly and steadily, and work in layers no thicker than 1/4 inch. A heat torch can help address bubbles at the surface.

Should you buy it?

Choose this kit when you want clear epoxy for several kinds of craft or wood projects and value having resin and hardener in a generous 4-gallon set. The equal-volume ratio, included mixing tools, and guidance for pours make it a practical fit for makers working on molds, coasters, jewelry, and glossy coatings.