AKUMAX AM -3D05-Teak-8mm-8P Flexible Acoustic Wall Panels, Teak Veneer

For rooms where reflected sound needs attention and a wall or column has a curve, these rollable wood-slat panels bring acoustic treatment and a finished surface together. Their flexible construction follows non-flat surfaces while keeping a continuous slatted look. Choose them to shape a feature wall, soften room reflections, or do both in one installation. Unlike a rigid panel intended for a flat wall, this design can bend between its MDF slats to follow curved surfaces.

The essentials

Each panel combines real teak wood veneer, dimensional MDF slats, and high-density acoustic PET felt. The wood grain adds warmth and visible texture, while the spaced slats and felt are designed to absorb reflected sound and help reduce echo. The panels have been tested at an NRC of up to 0.80, making them relevant to spaces such as offices, bedrooms, studios, gaming rooms, and media rooms where room acoustics matter. They improve room acoustics, they are not designed to soundproof walls.

The eight-panel pack provides about 62 sq. ft. of nominal coverage. Each panel measures 47.2 x 23.6 inches and covers about 7.75 sq. ft. That gives you a substantial surface area for a coordinated slatted treatment, whether the project is a feature wall or several smaller sections. Plan for additional material where trimming, corners, or slat alignment require it.

How it fits

Use the rollable format on curved walls, columns, and other non-flat indoor surfaces, or install the panels on a straight wall for a dimensional wood-slat finish. The teak veneer, dark acoustic felt, and raised MDF slats create a layered architectural look suited to residential or commercial interiors. For a listening, gaming, or work area, the acoustic backing addresses reflected sound while the visible wood surface gives the room a more finished focal point.

This is a practical choice when the project calls for both a natural wood appearance and a panel that can follow a curve. A fixed, rigid slat panel is a different approach for straight surfaces, the flexible construction here is the useful distinction when a column or curved wall is part of the design. Before installation, measure the surface and test-fit the panels so the layout, edges, and slat alignment work together.

How to use it

Install the panels vertically or horizontally on a clean, dry, structurally sound indoor surface. Construction adhesive or suitable fasteners can be used to secure them. The panels can be trimmed to fit, so map out the full layout first and account for corners and cut edges when estimating coverage. Adhesive, screws, fasteners, and cutting tools are not included, allowing you to choose an installation method and supplies that suit the surface and project.

For a curved section, test the fit along the intended path before fastening. The panel flexes between the MDF slats, helping the wood-slat face follow the contour without turning the design into a plain flat finish. On a straight wall, the same panels create a consistent slatted feature and add depth while contributing acoustic absorption.

Is it worth it?

These panels make sense for a project that needs more than a decorative wall covering: they combine real teak veneer and three-dimensional slats with acoustic PET felt, and the rollable format extends their use to curved walls and columns. The eight-panel pack offers about 62 sq. ft. of coverage, giving you a defined quantity for planning a room treatment. If you are finishing a studio, media room, office, or bedroom and want a wood-slat appearance that can work across both flat and curved indoor surfaces, this set brings those goals into one coordinated panel system.