AdaLov CPE660 Outdoor Wireless Bridge, 5.8GHz, 14dBi, IP65, 3KM
Product description
For farms, shops, and property owners who need to connect buildings or remote cameras, the AdaLov CPE660 creates a point-to-point wireless link without running Ethernet cable between locations. Its 5.8GHz connection, directional 14dBi antenna, and stated range of up to 3KM are designed for outdoor links with a clear line of sight.
The kit includes two bridge units, PoE adapters, and mounting hardware for setting up a link between two locations.
Who it’s for
Use the CPE660 to extend a network from a main building to a barn, garage, workshop, warehouse, or other outbuilding. It can also connect remote IP cameras to a central network, making it useful for gates, parking areas, and farm buildings where a wired run would be difficult to install. Starlink is listed as a compatible network source, so the bridge can carry a connection to a detached building.
Unlike an indoor Wi-Fi extender intended to improve coverage within a building, this outdoor bridge is designed to link separate locations. Mount the units outdoors, face them toward each other, and maintain a clear line of sight for the point-to-point connection. It also supports point-to-multipoint and access point modes for other network layouts.
Benefits
The focused 14dBi antenna directs the wireless link toward the paired unit, supporting long-distance connections between buildings. The 5.8GHz band supports wireless speeds up to 300Mbps, while two 100Mbps Ethernet ports provide wired connections for network equipment such as cameras, routers, or switches. For a surveillance setup, one bridge can link cameras at a remote site back to the main network without requiring a long Ethernet cable between buildings.
The CPE660 is supplied preconfigured in WDS bridge mode to simplify a two-unit setup. Mount and aim the pair, then connect power using the included PoE adapters. Buyers often highlight straightforward setup, speed, and signal reception, including use with remote cameras. Feedback on connectivity is mixed: some report successful links between buildings, while others mention pairing difficulties. Some buyers also report early unit failures, so careful mounting and setup are important parts of deployment.
Its IP65-rated enclosure is intended for outdoor installation and helps protect the bridge from dust and rain. That makes the directional units suitable for exposed locations such as pole mounts, barns, and exterior walls.
Technical details
- Model name: CPE660
- Type: Outdoor point-to-point wireless bridge
- Frequency: 5.8GHz
- Wireless standard: 802.11a, 802.11ac
- Maximum wireless data rate: 300Mbps
- Coverage: Up to 3KM with clear line of sight
- Antenna: Integrated directional antenna, 14dBi
- Ethernet: Two 100Mbps ports
- PoE: Included 24V adapters, one port supports 24V PoE only, while the other supports 24–48V PoE. Match the power source to the port requirement.
- Weather protection: IP65
- Included: Two CPE660 wireless bridges, two PoE adapters, two pole mounts, two small metal cable ties, and four large metal cable ties
Buying verdict
Choose this bridge when the goal is to carry one network connection across an outdoor gap to a barn, shop, garage, or camera location. Its paired-unit kit, directional antenna, mounting hardware, and weather-resistant housing are tailored to that task. For a reliable point-to-point installation, position both units with a clear path between them and use the correct PoE port and voltage.