WOLFANG Dash Cam Front and Rear 2.5K (1440P) with 3.0" LCD, Loop Recording & 24H Parking Guard
Product description
If you’re looking for something that covers both the road ahead and what’s happening behind, a dual dash cam makes day-to-day recording much more straightforward. The WOLFANG Dash Cam Front and Rear 2.5K is built around that front-and-rear setup, with loop recording, a G-sensor, and a claimed night vision and WDR approach to keep footage usable in tougher light.
That said, it’s not a magic wand. The value depends a lot on how you plan to install it (especially for parking mode) and whether you’re happy tweaking a couple of settings for stable operation.
The essentials: what this dash cam is for
This is a dual car dash cam that records from both the front and the rear. The front camera is listed as 2.5K (1440P) at 30fps, while the rear camera is 1080P at 30fps. In practice, that front-focused higher resolution is usually the part you’ll care about most when you need clearer details such as number plates.
It also includes everyday safety-minded features like loop recording (so the camera can keep writing without you having to constantly swap files) and a G-sensor (to help protect clips when the camera detects a sudden change).
Key features you’ll actually use
A few functions here are clearly aimed at real-life driving, not just basic “recording”:
- Loop recording: overwritten continuously once the storage is full, which is what you want for normal commutes.
- G-sensor: helps with saving important moments rather than losing them to overwriting.
- Parking monitoring (24H Parking Guard): designed to cover when the car is parked, but this typically requires power beyond standard in-car charging.
- Motion detection: adds another trigger for events when the vehicle isn’t moving.
- WDR and night vision approach: the listing mentions WDR balancing for low light and challenging weather conditions.
There’s also a 3.0" LCD display, which can make it easier to review clips on the spot rather than relying entirely on a computer.
Night performance and WDR: what to expect
On paper, the front camera combines a high-resolution CMOS sensor, a 6-layer optical lens, and an F2.0 aperture, plus WDR to balance exposure in mixed lighting. The idea is that you get more consistent footage when streetlights, headlights, and darker stretches of road are all in the mix.
A practical note: the listing stresses balanced night vision by exposing to low-light conditions, and it also references performance during cloudy and rainy weather. That’s encouraging, but dash cams vary in results depending on installation angle, local lighting, and your lane/road setup.
Everyday setup tips (and the limits to know)
This one comes with fairly specific usage guidance, which is worth taking seriously because it affects whether the dash cam behaves smoothly.
The manufacturer suggests turning off Parking Mode and Screen Saver when driving to avoid intermittent behaviour, and turning them back on when parked. It also advises enabling loop recording and setting the G-sensor to “low”.
Finally, it notes that for charging you should use the original car charger. If the camera doesn’t work, there’s a reset option (restoring factory settings and using the reset hole).
None of that means it’s unreliable—but it does suggest it’s best approached with the willingness to set it up properly from day one.
Tech specs (quick read)
- Name: WOLFANG Dash Cam Front and Rear 2.5K
- Type: Dual dash cam (front and rear)
- Format: Front 2.5K (1440P) at 30fps, Rear 1080P at 30fps
- Display: 3.0" LCD
- Wide angle: 170° (wide-angle lenses)
- Functions: Loop recording, G-sensor, motion detection, WDR, parking monitoring (24H Parking Guard)
- Included with purchase: Dash cam with SD card and SD card reader
Who it suits (and who should be cautious)
It makes sense if you want a dual setup for everyday coverage: front clarity for details like number plates in daytime and nighttime, and rear recording for added context during parking and stop-start driving.
It may not suit you as well if you’re expecting effortless “fit and forget” operation without any menu changes—because the listing specifically mentions switching off certain modes while driving. It also may be a less straightforward buy if you want parking monitoring without doing extra installation work, as the hardwire kit is necessary for installation and is not included.
In other words: great for people who are willing to set it up properly, less ideal for those who want parking mode immediately with no extra parts.
Should you buy it?
Worth considering if you’re buying a dual front-and-rear dash cam and you care about front detail (2.5K) as well as the routine coverage that loop recording and G-sensor protection support. The 3.0" LCD and the wide-angle 170° lenses also point to a “review on the move” style of use.
You may want to skip it if you don’t plan to handle installation for parking monitoring, because the hardwire kit isn’t included, or if you prefer a system that doesn’t require you to adjust settings like Parking Mode and Screen Saver while driving.
Mini FAQ
Does this dash cam include an SD card? The listing says it includes an SD card and an SD card reader.
What video quality is recorded from the front and rear? Front is described as 2.5K (1440P) at 30fps, and rear as 1080P at 30fps.
Is parking monitoring included? Parking monitoring is mentioned as 24H Parking Guard, but the listing also states that a hardwire kit is necessary for installation and isn’t included.
Is it meant to work at night? The front camera is described as using a night vision approach with WDR, aimed at balancing exposure in low-light conditions.
Do I need to change settings for best results? The listing recommends turning off Parking Mode and Screen Saver when driving, enabling loop recording, and setting the G-sensor to “low”.