Thermalright Frozen Notte 360 Black ARGB V2 360mm AIO liquid CPU cooler (AM4/AM5, Intel LGA 1851/1700/115x/1200/2011)
Product description
If you’re trying to keep CPU temperatures under control with less fuss than going custom water, the Thermalright Frozen Notte 360 Black ARGB V2 is built for exactly that kind of “tidy but capable” cooling. It’s a 360mm all-in-one (AIO) liquid CPU cooler with an integrated pump head and three PWM fans, aimed at users who want solid airflow and RGB eye-candy without getting too deep into tinkering.
The spec sheet is pretty confident about the core parts: a full copper mirror plane base, a 360mm black aluminium fin cold plate, and a protective water pipe described as high polymer woven. It’s also designed around automatic fan control via PWM, so day-to-day noise and thermals should be easier to manage. That said, like any 360mm AIO, it will only make sense if your case can physically take a 360 radiator and you’re comfortable planning the fit before you buy.
Key points
This cooler uses a copper cold plate and an integrated pump head, then pairs it with three PWM fans to push air through a 360mm radiator setup. In use, that means you’re not just relying on the pump alone, you’re getting structured airflow too, which is helpful when your CPU ramps up under gaming, rendering, or long workloads.
The “Black ARGB V2” angle matters if you care about aesthetics: the three included fans support ARGB lighting, and the light colour can be adjusted manually (as described). You can also expect PWM speed control that adjusts according to CPU temperature, rather than running everything flat-out.
Worth knowing: 360mm AIOs aren’t universal in practice. Even when a motherboard socket is supported, the chassis clearance still determines whether the cooler is a realistic buy.
The essentials
At a high level, the Thermalright Frozen Notte 360 Black ARGB V2 is a 360mm AIO CPU liquid cooler designed for a wide set of Intel and AMD platforms. Compatibility is listed for Intel LGA 115X/1200/1700/1851/2011/2066 and AMD AM4/AM5 (plus older AMD sockets listed), which gives it good “upgrade path” potential if you’re staying within those ecosystems.
It’s also built around a full copper mirror plane base and an integrated pump design described as using mirror plating/reflection and a copper bottom with a very fine 0.1mm spacing. The pump speed is specified at up to 5300RPM (±10%), and the unit includes three PWM fans (model TL‑E12B‑S V2) with speeds up to 2000RPM (±10%).
What stands out
Where this cooler earns its keep is the combination of cold-plate materials and fan control. The base is described as full copper with a mirror plane finish, and the radiator fin cold plate is black aluminium (360 specification). In parallel, the included fans are designed to keep airflow strong while controlling noise via PWM.
A specific detail you might appreciate if you’ve heard budget AIO fans chatter: the fans use an S‑FDB bearing, and the description says it can solve issues of fan chattering in hoisting mode. Noise is listed as ≤27.7dBA, which suggests it’s aiming for “quiet enough” rather than being an obvious jet engine.
You’ll also want to note the practical install consideration mentioned for chassis width: a recommended chassis width greater than 250mm. That’s not the same as guaranteeing radiator clearance, but it’s a pointer that the physical build matters.
Tech specs
- Name: Thermalright Frozen Notte 360 Black ARGB V2 Water Cooling CPU Cooler
- Type: 360mm AIO (integrated water-cooled CPU liquid cooler)
- Dimensions (water-cooled heat sink): 397 * 120 * 27mm
- Water conduit length: 450mm
- Pump speed: 5300RPM ± 10%
- Fan type/count: 3 x PWM ARGB fans (TL‑E12B‑S V2 balanced fan)
- Fan size: 120 * 120 * 25mm
- Fan speed: up to 2000RPM ± 10%
- Fan noise: ≤27.7DBA
- Fan interface: 4pin PWM
- Wind pressure (MAX): 2.87mmH2O
- Air volume (MAX): 72.37CFM
- Bearing: S‑FDB bearing
- Supported platforms (Intel): LGA 1150/1151/1155/1156/1200/1700/1851/2011/2066
- Supported platforms (AMD): AM4/AM5/AM2/AM2+/AM3/AM3+/FM1/FM2/FM2+
Getting the most from it (and where it might fall short)
If you’re aiming for a clean 360 radiator build, this is the kind of cooler that fits well because it’s built as an “all integrated” AIO: copper cold base, integrated pump head, and matching 120mm PWM fans. The included three-fan setup also makes it straightforward to run balanced airflow without mixing parts.
However, it may not be a great match if you’re expecting a universally easy fit. Even though the socket compatibility is broad, a 360 radiator still needs appropriate mounting support, plus enough case clearance for the radiator and tubes. If your case only supports smaller radiators (or space is tight around the motherboard area), you could end up buying the right socket compatibility but the wrong physical layout.
Also, the description gives speeds and noise targets, but it doesn’t provide performance testing numbers for real-world CPUs. So you’re best treating it as a well-specified mid-range type AIO on paper, rather than assuming it will outperform everything else you could buy.
Who it’s for
This cooler suits people who want: - A 360mm AIO approach for CPU cooling without custom loop complexity - PWM-controlled fan behaviour tied to CPU temperature - ARGB lighting on the included fans - Broad Intel/AMD socket support (based on the listed compatibility)
It’s less suitable if you prioritise a compact build, have limited radiator space, or you’re the type of buyer who needs benchmark-grade claims before committing.
Mini FAQ
Is the Thermalright Frozen Notte 360 Black ARGB V2 compatible with AMD AM5?
The product description lists support for AMD AM4 and AM5, so on paper it should be compatible with AM5 systems.
Does it use PWM fans?
Yes. The three included TL‑E12B‑S V2 fans are listed as 4pin PWM fans, and the description says speed can automatically adjust according to CPU temperature.
What case size should I plan for?
The description specifically mentions a recommended chassis width greater than 250mm. Beyond that, you’ll still need to check your case’s ability to mount a 360mm radiator.
Is there ARGB lighting?
Yes. The fans are described as ARGB-capable, with light colour adjustable manually.
Final verdict
Should you buy it? If you’re building a PC that can realistically fit a 360mm AIO radiator and you want PWM-controlled cooling with three ARGB fans, the Thermalright Frozen Notte 360 Black ARGB V2 looks like a sensible “spec-led” choice with a copper base and an integrated pump design.
You may want to skip it if your case space is tight or you’re not planning a 360mm radiator layout. And because the information provided focuses on component specs rather than performance testing across specific CPUs, it’s not the safest pick if you need proven, head-to-head cooling results before purchase.