RnCop Hot Glue Sticks 65 Pack 11mm x 100mm 🧰
Description:
This pack of hot melt sticks offers a convenient supply for hobbyists and light repairs, providing fast adhesion for a variety of materials. The 65-piece set with an 11 mm diameter and 100 mm length is suitable for standard low and high temperature glue guns, allowing quick bonds on wood, fabric and plastics according to the manufacturer.
Key Points
These glue sticks are formulated from Resin and EVA material and are described by the maker as A+ Grade, with no noticeable odour during use. They reach usable tack in around 30 seconds, which makes them practical for crafts, floral work and quick household fixes. 🔧
Compatibility is a strong point. The sticks fit most common glue guns that accept 11 mm diameter consumables, so you will not need a specialist tool to start using them. They are also described as durable once cured, forming bonds on surfaces such as metal, glass and leather. 🎨
Consider that hot melt adhesives vary in shear strength and temperature resistance, so these sticks may offer very good results for domestic and creative applications but may not match specialised industrial adhesives for heavy load bearing or high temperature environments, according to the manufacturer.
Technical Specifications
- Name: RnCop Hot Glue Sticks, 65 Pack 11mm x 100mm
- Diameter: 11 mm
- Length: 100 mm
- Quantity: 65 sticks per pack
- Material: Resin / EVA, A+ Grade
- Odour: No smell (manufacturer claim)
Usage Recommendations
For craft projects, apply the melted glue to one surface and press both parts together immediately for the best contact. Allow a short cooling period for initial set, typically within 30 seconds, and handle the joint carefully until fully solid. For thicker or porous materials such as foam and fabric, a slightly higher temperature glue gun setting can improve penetration and adhesion. When working with glass or metal, ensure both surfaces are clean and dry to reduce the chance of poor bonding.
If you plan to use the sticks in a high frequency professional setting, rotate stock and inspect for any change in consistency over long storage periods. Also, take usual safety precautions when handling molten glue and hot equipment to avoid burns and accidental contact with eyes or skin.
