monTEK 1.1" Ultra Slim Full Motion TV Wall Bracket (43–90 inch, up to 60kg, max VESA 600x400mm)
Product description
If you want a TV wall mount that stays out of the way, monTEK’s ultra-slim full motion bracket is built around that idea. It retracts down to about 1.1 inches from the wall, while still offering tilt, swivel and the ability to fine-tune the level after installation.
That said, it’s not a “fit-and-forget” mount. The biggest day-to-day difference comes from getting the VESA size and the wall type right, because this is designed for solid fixing and not for drywall-only installs.
The essentials
This monTEK TV wall bracket is designed for LCD/LED/OLED TVs from 43 up to 90 inches, with a VESA pattern range of 100 x 200 mm to 600 x 400 mm. It’s rated to support up to 60kg, and it uses a steel build intended for a sturdy, reliable installation.
The headline feature is the ultra-slim profile: it sits extremely close to the wall (about 1.1 inches). For rooms where the TV is meant to look neat rather than “stuck out”, that’s the main benefit you’ll notice.
It’s also described as full motion: tilt is provided to help reduce glare (up to +3°/-12°), it extends out to about 16.5 inches from the wall, and it can swivel left/right (up to +/-60°, with the maximum angle depending on screen size). After fitting, you can also level the screen by about +/-3°.
What you’ll notice day to day
In practice, a full motion mount is about flexibility rather than looks alone. In a living room, you might angle the TV slightly to cut down reflections from a lamp or window without moving furniture. This bracket’s tilt-only range is meant for that kind of glare management, and the no-tools adjustment for tilt is a nice usability touch on paper.
The swivel range makes it useful when your seating isn’t perfectly in line with the TV wall—think about an open-plan space where you’re watching from a different spot. There’s also an emphasis on tidier installation: a Velcro cable management solution is included to help keep cables more organised and less visible.
One limitation to keep in mind: the bracket itself can swivel up to +/-60°, but the maximum reachable angle depends on the TV size. So if you’re trying to achieve a very large off-centre viewing angle, it’s worth checking whether your specific TV dimensions will restrict that.
Key features that matter for choosing
This mount is built around three decision points: compatibility, wall compatibility, and adjustability.
- Compatibility range: VESA up to 600 x 400 mm and TV sizes from 43–90 inches, with a max weight of 60kg.
- Ultra-slim look: retracts to around 1.1 inches from the wall for a cleaner finish.
- Full motion adjustments: tilt to reduce glare, swivel for different viewing positions, extend out when you need access, and level the display after install.
It also mentions multiple articulating arms (six) for a stable viewing experience, along with a stated load test that it “passes” up to four times the maximum. You won’t feel the test, obviously, but it’s at least a helpful signal of how it’s positioned in terms of strength.
Installation and where it’s suitable (and not)
The wall type guidance is important here. The mount is intended for installation in concrete, brick walls, and 16-inch/18-inch wooden studs.
The instructions also specifically warn not to install the swivelling wall TV bracket only on plasterboard (drywall) panels. If your wall situation is mostly drywall without proper stud/solid backing, this is one of those cases where you may want to pause and plan a safer fixing approach.
The kit is described as including what you need for an easier setup: instructions, a level, and the necessary hardware. Installation is summarised as connecting the TV brackets, mounting the wall plate, then hanging the TV.
If you’re used to basic TV brackets, this one should feel reasonably straightforward—just make sure you take the time with measurement and alignment before fully tightening everything.
Tech specs
- Name: monTEK 1.1" Ultra Slim TV Wall Bracket (Full Motion)
- Type: TV wall mount (full motion, tilt + swivel + post-install levelling)
- Capacity: up to 60kg
- TV size range: 43–90 inch
- Max VESA: 600 x 400mm
- VESA range: 100 x 200mm – 600 x 400mm
- Wall stud fit: 16" / 18" studs
- Retracted depth: about 1.1 inches
- Extension: up to 16.5 inches from the wall
- Tilt: +3° / -12°
- Swivel: +/-60° (maximum depends on screen size)
- Post-install level adjustment: +/-3°
- Wall materials (intended): concrete, brick, wooden studs
- Cable management: includes Velcro
Final verdict
It’s worth considering if you’re after a full motion TV wall mount that keeps a very slim profile, while still letting you tilt for glare and swivel for flexible viewing. The 1.1-inch retracted stance is a strong “looks good on the wall” selling point, and the compatibility range (VESA up to 600 x 400 mm, up to 60kg, 43–90 inch TVs) covers a lot of mid-to-large setups.
It may not be the right choice if your wall is mainly plasterboard/drywall with no solid backing, since the guidance explicitly discourages installing it only on plasterboard panels. It can also feel less ideal if you need guaranteed maximum swivel at extreme angles, because the maximum swivel angle depends on screen size.
For most buyers, the decision comes down to a simple checklist: confirm your TV’s VESA size, make sure the TV stays within the 60kg rating, and plan the wall fixing method for your exact surface.
Quick FAQ
Will it suit a 43 to 90 inch TV?
Yes, it’s listed for TVs in the 43–90 inch range, provided your VESA pattern sits within 100 x 200 mm to 600 x 400 mm and the TV weight is within the 60kg limit.
How close to the wall does it sit?
On paper it retracts to about 1.1 inches from the wall, which is the main reason people choose this kind of ultra-slim mount.
Can I reduce glare?
The mount is described as tilting +3°/-12° to help reduce glare. It’s also noted that this tilt adjustment can be done without tools.
Does it work on plasterboard (drywall)?
The instructions specifically say not to install the swivelling TV wall bracket only on plasterboard panels. It’s intended for concrete, brick, and wooden studs (16"/18").
Can the TV be levelled after fitting?
Yes, it supports post-install levelling of about +/-3°.