Flintronic wire connectors 80 pcs quick

The essentials

Flintronic wire connectors are designed to make cable splicing quicker and tidier when you are working with low voltage wiring and everyday installations. With 80 connectors in the pack, you get enough quantity for multiple joints without relying on electrical tape and improvised methods. The dual wire terminal block format helps you connect two conductors using a push type design, which can reduce strain during setup and make it easier to plan routing.

This pack is built around a peel free, push style approach. You remove the cable sheath first, then use the orange clip action to secure the conductor in place. According to the manufacturer, the method helps reduce wiring time by around 70% compared with more traditional options like electrical tape and braided butt connectors. 🧰

When you are tackling compact or complex areas, these connectors can be a practical choice for neat cable management. They are also intended to support electrical testing via test holes on the connector surface, so you can complete checks without having to remove tape. It is worth noting that safe use still depends on using the correct wire gauge for the connector type and ensuring the connection is fully seated.

Key features and what you’ll notice day to day

A major advantage of this set is the ability to handle a combination of SPL 1 wire connectors that can be freely combined and spliced into SPL 2 up to SPL 6 docking cable connectors, depending on your wiring layout. That flexibility helps when you need different branching or docking configurations across a project. 🔧

The build materials are selected with reliability in mind. The terminal uses PA66 for the body described as tie rod, with a flame retardant PC for the shell, while the inner conductor is nickel plated copper. The manufacturer highlights properties such as flame retardancy, anti corrosion, anti ageing, and high voltage resistance, alongside long service life. ✅

In day to day use, the push type operation and independent shrapnel arrangement means different wires can be managed separately. Each terminal is described as having a detection link that is recycled, with an individual connection path for each wire inside the connector. That structure can be helpful when you are joining wires of the same type but slightly different diameters within the supported range. 🙂

You will also find the instruction process is straightforward. First remove the cable sheath to the stated length of about 9 to 10 mm, then gently push the orange clip up 90 degrees, insert the cable, and turn off the switch. Once the conductor is in place, the connector is designed to hold the wires securely without requiring you to rely on twisting and taping for each joint.

Tech specs

• Name: flintronic Wire Connectors 80Pcs Quick Dual Wire Terminal Block
• Type: Quick dual wire terminal block connectors
• Capacity: 80 pcs
• Format: Peel free push type wire splice connector terminals
• Size: For 18 to 22 AWG wire
• Material: PA66 tie rod and flame retardant PC shell with nickel plated copper conductor
• Usage range: 0.2 to 4 mm² for solid wire and 0.08 to 2.5 mm² for stranded soft wire

What to consider before you buy

It’s a good fit if you are doing building wiring where you need multiple neat splices in a compact space, such as using a switch to control multiple lights. It makes sense if you want a repeatable connection method that can streamline work compared with tape and braided butt connectors, while still allowing basic electrical testing through the connector test holes. 🧰

It might not suit you if your project uses wire sizes outside the stated 18 to 22 AWG range, or if your wiring plan requires a different connector style than the SPL 1 based combination approach. You should also allow for careful prep, including stripping the sheath to the stated 9 to 10 mm before inserting the conductor, so the terminal can seat correctly.