Charlore Long HDMI Cable 30m (HDMI 2.0) for 4K@60Hz, 18Gbps, HDR, ARC/eARC & Home Cinema
Product description
What it is and why the length matters
A long HDMI lead can be one of those “silent” upgrades: you stop having to place your TV, projector, console or media box wherever the cable allows. The Charlore Long HDMI Cable is built around a 30m run and is positioned for higher-spec video and audio support on paper, including 4K at 60Hz and HDMI 2.0 features.
That said, with any extra-long HDMI cable, it’s worth thinking about real-world conditions. Long runs can be more sensitive to signal strength and installation details (how it’s routed, whether it’s near power cables, and the overall setup). If your goal is a straight-through home theatre or AV install where you can plan the run carefully, this type of cable can make life much easier.
Key features that stand out (and what you’ll actually notice)
The headline claims here are HDMI 2.0 support and “high speed” transmission aimed at reducing issues like frame loss during playback. It’s also described as supporting Ultra HD up to 4K, 1080p, 3D video, and HDR, alongside ARC.
On the audio side, it’s marketed as supporting 7.1 surround sound and being optimised for object-based audio formats, with mention of Dolby Atmos and DTS:X. There’s also support for Dolby Vision in the provided description, plus enhanced audio return channel (eARC).
In practical terms, the benefits you should be looking for are:
- Smoother high-resolution viewing (especially if you’re targeting 4K content)
- Better alignment between TV and soundbar/AV receiver audio through ARC/eARC
- Compatibility with a mixed set-up (games, Blu-ray players, streaming boxes, projectors, monitors), since the lead is intended for HDMI ports across typical AV devices
Still, it’s not a miracle cure. If you’re expecting perfect performance in every environment regardless of routing, you may find it a bit optimistic—long HDMI tends to depend on installation.
Key specifications (from the info provided)
- Type: HDMI cable (HDMI 2.0)
- Length: 30m
- Supported video: 4K, 1080p, 3D
- Refresh target: 4K@60Hz
- Bandwidth: 18Gbps (marketed as high speed)
- Audio: 7.1 surround sound, ARC/eARC mentioned
- HDR: HDR supported, Dolby Vision mentioned
- Compatibility: backward compatible with HDMI 2.0b / 2.0 / 1.4 / 1.3 / 1.2 / 1.1 (as stated)
- Extras mentioned: ARC, HDR, Ethernet data
- Connector finish: 24K gold-plated materials (as described)
Who it’s for (and who should be cautious)
It suits you if you’re dealing with a real installation problem: your TV/projector is set where it needs to be, but the equipment isn’t close enough for a short cable. It also makes sense if you want one lead to cover both video and audio features—like HDR viewing and ARC/eARC audio return—without having to juggle separate cabling.
You may want to skip or be cautious if:
- Your setup is extremely sensitive to signal quality and you can’t control cable routing (for example, it runs close to heavy power cables)
- You only need basic 1080p for everyday viewing and you’d prefer a simpler, less performance-demanding option
On paper it’s a strong “middle-to-enthusiast” style cable for home cinema and AV setups, but it still has the same reality as other long HDMI leads: the environment matters.
Getting the most from a 30m HDMI run
Even a well-specced 30m HDMI cable can underperform if it’s installed poorly. For best odds of the performance you’re buying for, try to keep the run tidy and deliberate:
- Plan the route before you pull the cable through. Avoid sharp bends and unnecessary twists.
- Keep the HDMI away from mains power cables where possible.
- Make sure both ends are seated firmly in the device ports.
A quick example: if you’re setting up a living-room home theatre with a projector and a Blu-ray player located on the opposite side of the room, you’ll likely appreciate the freedom to place the projector on its mount. With a longer cable, you can keep the line direct and avoid “coaxing” the devices into the same small corner of the room just to connect.
The decision to buy
Worth considering if you need a long HDMI cable specifically for a 30m distance and you care about higher-spec video support (4K@60Hz) plus HDR and ARC/eARC audio. It also looks aimed at setups where you’re mixing multiple HDMI sources—TVs, projectors, monitors, and players—rather than a single, one-device connection.
It may not be a great match if you’re only using it for basic screen mirroring or short-distance connections, or if you can’t route the cable reasonably away from interference. In those cases, a simpler approach can be less hassle.
Final verdict
For many home theatre and AV installs, this Charlore 30m HDMI lead ticks the boxes you’d expect from HDMI 2.0 on paper: 4K@60Hz support, HDR (and Dolby Vision mentioned), plus ARC/eARC and surround-sound capability. Just don’t ignore the practical side—long HDMI is still installation-sensitive. If you can route it sensibly and you genuinely need the 30m length, it’s the kind of cable that can remove a lot of setup constraints.
Mini FAQ
1) Does it support 4K at 60Hz?
Yes, the product description states 4K@60Hz support alongside HDMI 2.0.
2) Will ARC/eARC work for soundbars or receivers?
The description mentions ARC and enhanced audio return channel (eARC), so it’s designed for setups that use audio return over HDMI.
3) Is it compatible with older HDMI devices?
The provided details say it’s backward compatible with HDMI 2.0b / 2.0 / 1.4 / 1.3 / 1.2 / 1.1.
4) Is 30m too long for normal HDMI use?
30m is on the long side by default. It can work well, but you should be prepared to route it carefully and avoid interference to get the best results.
5) What’s included / how does it connect?
The listing indicates it’s an HDMI cable with a gold-plated interface finish, designed to plug into HDMI ports on compatible devices.