Bosch 6m High Pressure Hose with SDS Quick Connect for Pressure Washers (up to 130 bar)

What this is for

If your pressure washer hose feels stiff, gets kinked easily, or you simply need more reach outdoors, the Bosch 6m High Pressure Hose is the kind of replacement that brings practicality back. On paper it’s built for day-to-day use with Bosch pressure washers that run at up to 130 bar, using a quick connection system (SDS Quick Connect).

A longer hose also changes how you clean. Instead of dragging the machine closer and repositioning your work every few minutes, you can stand further back and still reach driveways, patios, garden furniture and general exterior grime.

Of course, it’s not a universal “fit everything” hose—compatibility matters, and if your washer isn’t one of the listed models/pressure range, it may not be the right match. That’s worth double-checking before you commit.

The essentials at a glance

This replacement high pressure hose comes with a 6 m length, a 9.5 mm diameter, and a torsion-resistant design. It’s described as resistant to twisting, which is useful if you’ve ever had hoses slowly lose their flexibility after lots of winding/unwinding.

Bosch also specifies that it’s capable of resisting pressures up to 130 bar, which means it’s intended for washers with a maximum of 130 bar pressure.

The connection is SDS Quick Connect, so you’re not looking at a complicated fitting process—more of a straightforward swap if your washer supports that quick-connect style.

What you’ll notice in use

A 6 m hose isn’t just “longer”, it’s usually the difference between cleaning efficiently and constantly moving around. With this kind of replacement, you’re typically getting:

• Better freedom of movement while rinsing or scrubbing external surfaces
• Less stress on your setup if the power washer body can stay put while you work
• A torsion-resistant hose that should cope better with twisting as you manoeuvre the lance

A quick real-world example: you’re clearing algae marks on a patio. With the hose longer than the original (or with a worn hose replaced), you can keep the washer in one spot near the tap and work across the whole seating area without repeatedly re-routing the hose over the same edges.

It’s not perfect in every scenario—if your job is very close-range and you’d prefer a shorter, more manageable lead, extra length can be a slight hassle. Also, the comfort of use depends on how you coil and store it between jobs.

Tech specs

• Length: 6 m
• Hose diameter: 9.5 mm
• Maximum pressure rating: up to 130 bar
• Connection type: SDS Quick Connect
• Torsion resistance: designed to resist twisting
• Included in the box: 6 m high pressure hose

Compatibility and requirements

This Bosch hose is specifically described as compatible with Bosch pressure washers including (as listed by the product): EasyAquatak 110/120, UniversalAquatak 125/130/135, AQT 33-10, AQT 33-11, AQT 35-12, AQT 37-13, AQT 40-13, AQT 42-13.

It’s also presented as valid for pressure washers with a maximum of 130 bar. So the practical “checklist” before buying is simple: confirm your model is on the compatible list and that your washer’s maximum pressure sits at or below 130 bar.

If your washer runs above that figure, the stated pressure rating could become a limitation. And if your current hose uses a different connector style, the SDS Quick Connect feature won’t help much.

Pros, limits, and who it suits

This is a fairly straightforward replacement: long enough for typical garden and driveway jobs, with a connection type designed for easier swapping, and a pressure rating aligned with 130 bar washers.

It tends to make sense if:

• Your Bosch pressure washer is one of the listed EasyAquatak / UniversalAquatak / AQT models
• You want a 6 m hose length for more reach outdoors
• You’re trying to replace a hose that twists, kinks, or just isn’t performing like it used to

It may not suit you if:

• Your washer isn’t within the specified maximum pressure range (up to 130 bar)
• Your current setup doesn’t match the SDS Quick Connect connection
• You prefer shorter hoses for very small, close-proximity cleaning (extra length can be awkward)

So, compared with buying a generic hose of unknown spec, this one’s more “fit-for-purpose” because the listing ties it to specific Bosch washer models and a defined maximum pressure. The trade-off is that you still have to verify compatibility rather than assuming it will work.

Mini FAQ

Is this hose a replacement only, or can it be used to extend reach on any washer?

It’s described as compatible with specific Bosch pressure washer models and for washers up to 130 bar. If your washer matches those requirements and uses SDS Quick Connect, it should work as a practical replacement for more reach.

How long is the hose?

The hose length is 6 m.

What connection does it use?

It uses SDS Quick Connect.

What pressure is it rated for?

It’s stated to resist pressures up to 130 bar, for use with washers that have a maximum of 130 bar.

Does torsion resistance really matter?

For many users, it does. When hoses twist and twist again during use, stiffness and kinking can follow. The listing specifically highlights resistance to twisting, which should help with day-to-day handling.

Is it worth it?

Worth buying if you have a compatible Bosch pressure washer (from the listed EasyAquatak / UniversalAquatak / AQT models) and you want a 6 m replacement that’s aligned to a maximum 130 bar use case, especially if your current hose feels more troublesome than it should. The SDS Quick Connect setup also helps if you want a cleaner, quicker swap rather than wrestling with a complicated fitting.

Skip it if your washer isn’t within the 130 bar maximum or you can’t confirm SDS Quick Connect compatibility with your machine. In those cases, you risk a mismatch even if the hose length looks appealing on the listing.