APOMOONS 5‑Piece USB Type‑C Pigtail Cable Extension (30cm) – 22AWG, 5V 3A, Open End 2‑Pin Wire for DIY Power Projects
Product description
What it is
This APOMOONS kit provides five USB Type‑C power cables with a pre‑terminated USB‑C end and a bare 2‑pin wire on the opposite side. The 22 AWG cable supports a nominal 5 V, up to 3 A, making it a practical DIY power lead for small USB‑C devices and peripherals.
Why it matters
For quick repairs, replacements, or custom builds, a solderable USB‑C power lead can save time and reduce the need for complete harnesses. The design emphasises a secure USB‑C connection on the plugged‑in end and a simple two‑wire terminated end for straightforward integration into DIY circuits or enclosures.
What to know
On the plug end, the red wire is positive and the black wire is negative, standard for DC power links. The USB‑C plug is pre‑assembled, which helps avoid loose connections during assembly. The overall build uses PVC insulation, offering flexibility for bending and routing within modest enclosures. It’s important to note that this product is intended for charging applications only and does not support data transfer.
Who it’s for
This set is well suited to hobbyists and tinkerers working on low‑power USB‑C devices, LED lamps, small fans, or other 5 V consumer electronics where a custom power lead is beneficial. It can also serve as a spare or replacement for DIY projects where a solderable, two‑wire power extension is required.
What you’ll notice in use
In practice, the copper core aims to reduce resistance, supporting consistent charging current for appropriate loads. The straight‑through plug design keeps the connection stable, which matters when a device relies on a reliable 5 V supply. However, if your project requires data connectivity or higher power draw, this solution may fall short.
Pros and cons
- Pros: simple solder‑ready end, clear colour coding (red/black) for quick identification, flexible PVC jacket, copper conductor for lower resistance, no data lines to confuse small projects.
- Cons: limited to charging use, not suitable for data transmission, 3 A maximum may not cover higher‑powered devices, 30 cm length may restrict routing in larger enclosures.
Before you buy
Check that your project is a 5 V charging scenario and that a 2‑pin bare wire will integrate with your enclosure or power interface. Ensure you’re comfortable with soldering or terminaling the bare ends. Consider the length to avoid tension on the USB‑C plug after installation.
Practical use example
Imagine you’re replacing a damaged desk lamp’s USB‑C power lead. The five‑pack gives you spare ends ready to solder into the lamp’s power module, letting you re‑route the supply neatly inside the base without altering the lamp’s original wiring harness.
Technical snapshot
- Type: USB Type‑C male to 2‑pin bare wire (open end)
- Cable gauge: 22 AWG
- Current rating: 3 A
- Voltage: 5 V
- Material: PVC insulation, copper core
- Length: 30 cm
- Quantity: 5 pieces
- Use case: charging only (no data transfer)
What to compare with (implied alternatives)
If you need data transfer or higher power versatility, you might consider alternative power leads with integrated data lines or different gauge, or a finished cable assembly with connectors on both ends. For strictly DIY charging leads, this option offers straightforward solderable ends and multiple spares in one pack, which can be cost‑effective for ongoing tinkering.
Decision of purchase
Is it worth it?
Worth considering if you’re doing straightforward 5 V charging projects and want handy, spare solderable USB‑C power leads with clear polarity and a robust plug connection. It may not be the best choice if you require data capability or higher current beyond 3 A, or if your enclosure demands a longer or more rigid lead. If you prioritise a ready‑to‑solder solution for light‑duty DIY electronics, this set offers practical value and flexibility for routine charging tasks.
FAQ
- Can these cables transfer data? No, they are intended for charging only.
- Is the 30 cm length fixed, or can it be extended? The kit provides 30 cm leads, extensions would require additional components or different assemblies.
- Are the ends solderable by beginners? The open 2‑pin end is designed for soldering in, but basic soldering skills are advisable for reliable joints.