Aetubree Studless Drywall TV Mount (No Drill) for 32–75 inch TVs, VESA up to 600x400mm
Product description
If your TV wall plan keeps hitting the same snag—finding studs, getting the holes straight, and ending up with an awkward gap—this Aetubree studless drywall TV mount is designed to take that stress out of the equation. On paper, it’s a no-drill, no-stud wall bracket with an ultra-slim profile and a modest +5° tilt, aimed at getting a neat finish close to the wall.
That said, “no drill” doesn’t mean “no requirements”. The wall type and drywall thickness matter a lot, and if your surface isn’t compatible you could be stuck looking elsewhere.
What this TV mount is for
This is a fixed TV wall mount intended for flat-screen TVs from 32 to 75 inches. The key idea is that you don’t need to locate studs or drill into them to install it. Instead, it uses tiny picture-hanging nails for a renter-friendly setup.
It’s the sort of option you consider when you want a clean, minimal-looking installation in a plasterboard/drywall scenario, or when you’re not keen on drilling into walls for a permanent fix. If you’re wiring a living room on a tight schedule, being able to fit it (even on your own, according to the install claim) in around ten minutes can be a big deal.
A small +5° tilt also helps if you want a slight adjustment to reduce glare and improve viewing comfort. It’s not a fully adjustable arm mount, so it won’t be for people who want to angle the TV dramatically after mounting.
Key features that affect your decision
No drilling and no studs (but not on every wall)
The biggest draw is the studless design: you’re not required to drill or find studs. That generally appeals to renters and to anyone who wants a quick, low-commitment wall setup.
However, the compatibility notes are quite strict. The mount can be used on solid concrete, cement, solid brick, drywall, plasterboard, and brick walls. It explicitly says not to install on tile walls, wooden partitions, marble walls, cavity walls, or soft walls.
It also notes that drywall thickness must be greater than 0.4 inches. If you’re unsure what you have behind your plasterboard, it’s worth double-checking before you order.
Slim clearance for a cleaner look
This bracket extends only 1.2 inch clearance from the wall. That’s the difference between “TV feels like it’s floating off the wall” and “it actually looks tidy”. If your priority is a flush, glare-reducing setup, this is aligned with that goal.
Build and capacity
The bracket is made from an aluminium alloy and is rated to support up to 150lbs (68kg). It also claims “3 times strength testing” to support that load. That’s encouraging on the materials side, though as with any mount, your wall must be suitable and correctly installed.
Fit and compatibility (VESA matters)
This mount is universal in the sense that it targets a wide range of TV models, but the fit hinges on VESA mounting hole spacing.
It’s listed for VESA mounting holes from 100x100 mm up to 600x400 mm. “Universal” here means it should cover most TVs that fall into that VESA range—not every TV with a 32–75 inch size will necessarily match the VESA pattern.
In terms of what TVs it’s said to suit, the description references Samsung, LG, TCL, Toshiba, Hisense, and Panasonic, plus other medium-to-large LED, LCD, and 4K OLED TVs. That’s helpful guidance, but the practical checklist is still your TV’s VESA spec and mounting hole pattern.
What you’ll notice during setup
The package includes mounting hardware and a built-in bubble level, which makes aligning the bracket less of a guessing game. The installation approach uses small picture-hanging nails.
As a quick example: if you’re mounting a mid-sized TV in a plasterboard living room, you’d typically position the bracket, check the bubble level, fix the bracket with the provided nails/hardware as instructed, and then attach the TV to the bracket. The “easy install within ten minutes” claim is especially relevant if you’re doing the job alone and want to avoid multiple trips to find tools.
One limitation to keep in mind: because it’s fixed and ultra-slim, you don’t get the kind of fine repositioning you might want with swing-out or articulating mounts. Measure twice before committing.
Where it shines—and where it may not
It makes sense if
It’s a solid pick if you have a drywall/plasterboard (thickness greater than 0.4 inches) or solid brick/concrete setup, and you want a clean, close-to-the-wall installation without drilling or locating studs. It also suits you if your TV sits within the 32–75 inch range and your TV’s VESA pattern falls within 100x100 mm to 600x400 mm.
You may want to skip it if
It may not suit you if you have tile walls, cavity walls, soft walls, wooden partitions, or marble surfaces. It might also be the wrong direction if you want more than a small +5° tilt for viewing angles, or if your TV’s VESA holes are outside the stated range.
Tech specs
- Supported TV size: 32–75 inch
- Max load: 150lbs (68kg)
- VESA compatibility: 100x100 mm to 600x400 mm
- Bracket style: fixed wall mount (ultra slim)
- Tilt: +5°
- Wall clearance: 1.2 inch
- Construction material: aluminium alloy
Is it worth it?
Worth considering if you’re installing a compatible 32–75 inch flat-screen on a suitable drywall/plasterboard or solid brick/concrete wall and you strongly prefer a no-drill, no-stud process. The ultra-slim clearance, the included bubble level, and the modest +5° tilt are all aimed at making the end result look neat and minimise glare.
Better avoided if your wall type is one of the excluded surfaces (tile, cavity walls, soft walls, wooden partitions, marble) or if you can’t confirm drywall thickness is greater than 0.4 inches. And if your TV’s VESA pattern doesn’t match 100x100 mm to 600x400 mm, you’ll likely be wasting time before you even get to mounting.
Mini FAQ
Can I use this on any wall surface?
No. The description limits installation to solid concrete/cement/solid brick, drywall, plasterboard, and brick walls, and specifically warns against tile, wooden partitions, marble, cavity walls, and soft walls.
Do I need to drill into studs?
It’s designed for no-drill and no-stud installation, using tiny picture hanging nails instead.
What TVs does it fit?
It supports 32–75 inch flat-screen TVs, but compatibility depends on VESA size: 100x100 mm to 600x400 mm.
Does it tilt?
Yes, it includes a +5° tilt intended to help with viewing and glare.
How close to the wall will the TV sit?
The bracket extends 1.2 inch clearance from the wall, giving an ultra-slim, close-to-wall finish.