monTEK Extra Long Full Motion TV Wall Bracket for 43–80 Inch TVs (1065mm arm, swivel & tilt)
Product description
Key takeaways
If you want a TV that can move to suit different seating angles, this monTEK full motion wall bracket is built around that idea: an extra-long, pull-out arm with swivel and tilt, plus a low-profile when retracted. It’s the sort of mount you’d choose when a straight-on, fixed position won’t quite cover how your room is actually used.
The essentials
This bracket is designed for most 43–80 inch flat/curved LCD, LED and OLED TVs, with support for up to 50kg. On paper, that “universal” range helps if you’re upgrading to a larger set, and the listed VESA support is broad enough to cover common mounting patterns (up to 600x400mm). You’ll still need to do the boring part first: check your TV’s weight and VESA pattern before buying, because the mount is only as compatible as that information.
The standout feature is the extra-long extension arm, taking the TV out from the wall up to 1065mm. That extra reach tends to matter in real rooms where the TV sits opposite a sofa, but people also watch from the side or from across a wider open-plan space.
What stands out day to day
The movement options are practical rather than flashy. The bracket supports rotation of +/-90°, and it includes tilt adjustment from -10° to +5° to help reduce glare. There’s also a fine horizontal adjustment of +/-3° once installed, which is the kind of detail that makes alignment feel less fiddly after the mount is on the wall.
For cable clutter, it includes three cable management straps. They won’t replace a tidy run-through behind the TV, but they do help keep things looking deliberate instead of a loose bundle.
One more thing: the design is described as space-saving and slim, retracting to just 2.4" from the wall. That’s useful if you care about the TV not looking “stuck out” when it’s not in use.
Where it shines (and the limits)
It’s a good fit if your viewing setup changes depending on where you sit, or if you’re trying to get a more forgiving viewing angle around the room. The extra-long 1065mm arm also suits situations where the wall-to-seating distance means a fixed mount would leave the TV too far off-axis.
It might not be the best choice if you mainly watch from one straight position, because you could end up paying for flexibility you won’t use. Also, installation guidance is clear that you shouldn’t mount it on drywall or hollow walls, so if your wall type isn’t a compatible option, you may need a different approach.
Tech specs
- TV size compatibility: 43–80 inch flat/curved LCD, LED and OLED TVs
- Maximum load: up to 50kg
- VESA compatibility (max): up to 600x400mm
- VESA patterns listed: 600x400, 400x400, 400x300, 400x200, 300x300, 300x200, 200x200
- Extension from wall: up to 1065mm
- Rotation (swivel): +/-90°
- Tilt range: -10° to +5°
- Fine level adjustment: +/-3°
- Retracted profile: 2.4" from the wall
- Material: steel
- Wall plate fit: compatible with brick, concrete wall, or 16"/18" spaced wooden studs
- Installation support included: instruction manual, bubble level, mounting template, necessary hardware in pre-labelled bags
Getting the best result
Before installation, double-check your TV’s VESA pattern and its weight against the stated limits—this is the point where many “universal” mounts either work perfectly or don’t fit at all. Also consider your wall type early: the guidance says not to install on drywall or hollow walls.
If you’re planning a typical setup, a sensible micro-scenario is mounting it on a main wall, then pulling the TV out and swivelling it slightly when you’re watching from the side of the room—then retracting it closer when guests aren’t around. That’s where the pull-out arm and swivel angles tend to feel worth it.
In the box
The package includes the instruction booklet, bubble level, a mounting template, and necessary hardware placed in pre-labelled bags, which should make setup less chaotic.
Should you buy it?
This monTEK full motion TV wall bracket is worth considering if you need a genuinely flexible TV position for a wider room layout, particularly thanks to the extra-long 1065mm extension, +/-90° swivel and tilt controls. It suits buyers with compatible brick/concrete or correctly spaced wooden studs and a TV that matches the listed VESA sizes and up to 50kg.
You may want to skip it if your viewing is always straight-on from one spot, or if your wall is drywall/hollow where this mount is not recommended. It’s also a case of “check first”: if your TV’s VESA pattern or weight doesn’t land within the stated range, the flexibility won’t matter because it simply won’t mount properly.
FAQs
What TVs does this mount suit?
It’s listed as compatible with most 43–80 inch flat/curved LCD, LED and OLED TVs, up to 50kg, and supports VESA patterns up to 600x400mm.
How far does the bracket extend from the wall?
The extension is described as reaching up to 1065mm from the wall.
Can it tilt to reduce glare?
Yes. The tilt adjustment is stated as -10° to +5°, plus horizontal fine-level adjustment of +/-3°.
Is it suitable for drywall?
No—the note says not to install on drywall or hollow walls.
What do I need to verify before buying?
Check your TV’s size, weight, and VESA pattern against the listed compatibility, so the bolt layout matches and the mount can safely support the TV.