2M Silicone Shower Tray Sealing Strip 25mm

Key features

A modest but practical water barrier, the 2M silicone shower tray sealing strip provides a simple way to reduce water escaping from shower trays, baths and sinks. Made from food grade silicone, it offers corrosion resistance and can tolerate higher temperatures and wear according to the manufacturer, while the twin adhesive backing helps keep the strip in place once fitted.

Technical details

• Name: 2M Silicone Shower Tray Sealing Strip
• Material: Food grade silicone
• Size: 15mm H, 25mm W
• Format: Two adhesive backing
• Capacity: 2m length

Usage tips

Clean and fully dry the surface before you measure and cut the strip to length, then peel and stick. For a longer lasting installation the manufacturer recommends using silicone sealant to fill the edges of the water barrier and allow 24 hours for the sealant to cure. Keep in mind the adhesive can become less sticky in cold conditions, a short blast of warm air from a hair dryer restores tack.

Benefits

This sealing strip suits shower floors, tray edges, bathtub edgings, kitchen sinks and the gap under bathroom doors to help keep wet areas separate from dry ones. It is useful around washing machines or toilets where splashes occur. Note that at 15mm height it is not designed to hold large volumes of water or serve as a full barrier for barrier-free showers, and the strip must be applied in straight runs with mitred joints at corners.

What to consider

It’s a good fit if you want a neat, low-profile edging that reduces splash and drip, and you plan to reinforce the bond with silicone sealant. It might not be a great match if you need a high dam for heavy water retention or an installation that follows tight curves. 2M Silicone Shower Tray Sealing Strip is a practical, low-cost way to tidy joins and limit damp patches around wet-room edges. 😊🛁