Vellure Premium Door Draft Excluder Strip — Door Seal 🏠

This door draft excluder strip from Vellure helps reduce cold air ingress and draughts at the bottom of internal and external doors, making rooms more comfortable and potentially lowering heating use. It is a self-adhesive seal designed for quick fitting and everyday household protection against noise, odours and small insects.

Key Points

The strip works as a low-profile seal that attaches to the underside of a door and blocks gaps where cold air and noise can enter. Installation is straightforward and fast, requiring only a clean surface and a trim to length if necessary. The adhesive is formulated to stick to a variety of materials while being kind to flooring, and the product is suitable for both internal and external doors. For noise reduction and to keep out smells and insects, this solution adds multiple small benefits without altering the door’s appearance. 🪟

Benefits

Because it is self-adhesive, the excluder removes the need for drilling or tools and can be fitted in minutes. It provides thermal resistance that may help reduce drafts and heat loss, contributing to energy saving when used as part of a broader home insulation strategy. The design also offers a degree of sound insulation, which is useful for quieter rooms or ground-floor properties. Consider that adhesion may be less effective on very rough or heavily textured surfaces, and the seal may require replacement over long periods of heavy wear. 🧰

Technical Specifications

• Name: Vellure® Premium Door Draft Excluder Strip
• Material: foam rubber with adhesive backing
• Installation: self-adhesive fit, trim-to-size
• Compatibility: suitable for most door types and floor finishes
• Function: draught prevention, noise reduction, barrier to odours and insects

Usage Recommendations

Prepare the door by wiping the lower edge clean and dry, ensure the area is free of dust and grease before applying the adhesive. Measure the door width and cut the strip to the correct length with scissors or a sharp blade, then peel the backing and press firmly along the contact area for best adhesion. If removal is needed later, peel back slowly and warm the adhesive lightly with your hand or a hairdryer to reduce residue. For very uneven thresholds, check that the seal makes continuous contact along the full width of the door to avoid gaps.