TCHOSUZ Door Barricade Brackets, Carbon Steel

These brackets may suit homeowners or people fitting out a garage, basement, barn or warehouse who want to brace a door from the inside with standard 2x4 lumber.

The set contains two black carbon-steel brackets, with pre-drilled holes and screws listed for installation. You’ll need a drill and suitable lumber to make the barricade.

They’re a straightforward hardware solution rather than a complete door bar. The listing describes use with inswing and outswing doors, but doesn’t give dimensions or a load rating.

Technical details

TCHOSUZ supplies a pair of door barricade brackets made from carbon steel. The product description says the material is intended to resist corrosion, rust and deformation, without hands-on testing, those claims aren’t a measure of how the brackets will perform in a particular installation. A lower anchor on each bracket is described as adding stability.

The brackets have pre-drilled holes, and screws are listed as included. The description identifies standard 2x4 lumber as the bar material, but doesn’t say that lumber comes with the set. That distinction matters: these brackets are only one part of the barricade, and you’ll need to source the bar separately if you don’t already have one.

Compatibility

The stated fit is standard 2x4 lumber, with the brackets intended to hold it across a door from the inside. The listing claims use with both inswing and outswing doors, as well as doors in places such as a room, garage, gate or warehouse. It doesn’t provide bracket dimensions or details about the surfaces they can be mounted to, so the product information alone can’t confirm fit for every door or frame.

For example, someone securing a basement door could position the brackets on the room side and use a cut-to-fit 2x4 as the crossbar. That’s a different approach from buying a complete, ready-to-use security bar: it calls for a separate piece of lumber and a drilled installation. It may suit you if you want that simple arrangement and are comfortable doing the fitting.

Usage tips

Plan the bar placement before drilling, then check that the lumber can sit in both brackets and span the door as intended. The listing says installation requires a drill, the pre-drilled holes and supplied screws should make the fastening step more direct, but the product details don’t specify mounting instructions or screw dimensions. Use the brackets only where you can install them securely for your particular door and frame.

The description also mentions fixing a shelf or using a bracket as a hook. Those are secondary suggested uses, not a substitute for a stated load rating. If you’re considering either, the listing gives no capacity to help judge what weight the brackets can support.

Three specific questions

Is the 2x4 included? The description says the brackets are designed for standard 2x4 lumber, but doesn’t state that lumber is included. The listed set is two brackets with screws.

Do I need tools to install them? Yes. The listing calls for a drill, the holes are pre-drilled and screws are included.

Can I use them on an outswing door? The product description claims compatibility with both inswing and outswing doors, but gives no dimensions or mounting-surface details to confirm a particular installation.

Before you buy

Choose these if you specifically want a pair of brackets for a DIY door brace using standard 2x4 lumber, and already have or can obtain the bar and a drill. The black carbon-steel construction and included screws make the intended setup clear, but this isn’t a complete barricade kit according to the details provided. It may not be the right fit if you need a ready-made bar, need confirmed measurements for your door, or require a published load rating before installation.