Coopaty Direct Thermal Shipping Labels, 4 x 6 in

When shipping labels are awkward to separate or a roll format does not suit your workflow, a fanfold stack can make packing orders more straightforward. These Coopaty labels are white, perforated 4 x 6 in sheets for direct thermal printing, supplied in a four-stack pack of 2,000.

The practical appeal is simple: print, tear at the perforation and apply the label. They’re intended for shipping, mailing and postage tasks.

Technical details

Each label measures 4 x 6 in and uses direct thermal printing, so your printer needs to support that print method and accept fanfold labels. The pack contains 2,000 labels arranged in a four-stack fanfold format. Perforations between sheets are designed to make individual labels easier to separate, and the adhesive is described as permanent.

The listing names compatibility with direct thermal printers from brands including Zebra, Polono, Rollo, Munbyn, Fargo, Elton, Datamax, Sato, Intermec and NEX. That list is useful as a starting point, not a guarantee for every model: check your printer’s supported label format and size before choosing. The manufacturer also describes the labels as water-, oil- and alcohol-resistant and scratch-proof, treat those as stated product claims rather than a substitute for checking whether they suit your handling conditions.

Getting the most from it

Load the stack according to your printer’s instructions, then print a test label before running a larger batch. That gives you a chance to confirm the layout sits within the 4 x 6 in area and that the printer feeds the fanfold paper correctly. For a typical packing session, you can print an address label, tear it at the perforation and apply it straight to the parcel.

Compared with a roll, fanfold labels are supplied as a stack rather than wound material. That format may fit a workflow where labels are fed from a stack, a roll-based setup may be a better match if your printer or work area is designed around rolls. May suit you if you want a bulk supply of separated shipping labels for a compatible direct thermal printer.

Usage tips

Keep the stack aligned as it feeds, and avoid pulling several labels at once if you only need one. The perforation is there to help with separation, while the permanent adhesive is intended to stay put once applied. Position the label on a clean, flat part of the parcel so the address is easy to read and the edges can be pressed down.

May not be the best choice if your printer requires roll labels, uses a different label size or does not support direct thermal media. The listing does not provide printer-specific setup instructions, so model-level compatibility matters more than the broad brand list.

Before You Buy

Choose these if your printer accepts 4 x 6 in fanfold direct thermal labels and you want a pack of 2,000 for recurring shipping or mailing work. If you rely on another feed format, or need confirmation for a particular printer model, identify that requirement first, the product details do not establish universal compatibility.

Before You Decide

Do these labels need a direct thermal printer? Yes. The product is specified for direct thermal printing, so confirm your printer supports that media type.

How many labels are included? The listing states 2,000 labels in a four-stack fanfold pack.

Can individual labels be torn off? They have perforations between sheets to make separating them easier.