Wirv kt 50FT High-Flow Garden Irrigation System, 12mm Tubing, 30 Adjustable Nozzles
Product description
Water raised beds, greenhouse rows, or potted plants with a layout you can direct to suit each growing area. This 50-foot system uses a 12mm main line and includes 30 adjustable nozzles. Each dual-port connector feeds two spray points, giving you options to aim water across a bed or concentrate it in one area.
Getting the most from it
Arrange the tubing along your garden zones, then position the nozzles to match your planting layout. Their 360-degree aim and bendable internal metal tubes help each spray hold its direction, while the adjustable heads let you change where water is directed as your beds or rows change. The manufacturer suggests starting with about 40 inches between watering points and adjusting for your layout. Under suitable pressure, each 1.1mm nozzle has an approximate 20-inch spray radius.
The quick-connect fittings make it possible to build out watering points with the included tubing and connectors. For a secure, leak-resistant fit, use the included tubing cutter to make a clean, straight cut, then push the tubing fully into each fitting. The two sprays at a dual-port connection can be aimed apart for broader coverage or toward the same bed for more focused watering.
This setup is designed for garden areas such as vegetable patches, raised beds, greenhouses, potted plants, and trees. Compared with a basic hose and a single movable sprinkler, its multiple adjustable spray points let you establish watering zones around the plants rather than moving one spray source from place to place. Buyers also praise the quick-connect setup and ease of installation, and some highlight its usefulness in raised beds.
Technical details
- Type: Complete drip irrigation system
- Main tubing: 50 feet, 12mm diameter
- Included nozzles: 30 adjustable spray nozzles
- Connectors: 15 dual-port connectors
- Faucet adapters: 2, 3/4 in.
- Additional components: 1 branch T-connector, 5 end caps, 2 filtered O-rings, 20 cable ties, and a tubing cutter
- Water pressure: Tested with up to 100 nozzles in an 80 PSI setup, results vary with pressure, layout, elevation, and settings
What stands out
The main line and paired nozzle connections make it easier to plan a larger or more divided garden layout with multiple points of directed spray. The system was tested with up to 100 nozzles at 80 PSI, while the kit itself supplies 30, so the test describes the expandable layout rather than the number of heads included. Actual spray performance depends on water pressure, layout, elevation, and nozzle settings.
Each nozzle can be adjusted independently, which is useful when neighboring beds or plant rows need different spray directions. The included cutter and quick-connect fittings also support a custom arrangement: cut the tubing for your zones, connect the fittings, and reposition the spray heads as the garden changes. Buyers commonly describe installation as straightforward and appreciate being able to swap or reposition sprayers.
Should you buy it?
It suits you if you want to set up adjustable watering points across beds, greenhouse space, containers, or other garden zones. The 50-foot, 12mm main line, paired nozzles, and supplied connectors give you practical building blocks for a tailored layout, while the adjustable spray direction helps target the areas you want to water. Choose it for a configurable garden irrigation setup rather than a single fixed spray point.