Upholstery Tacks, 9.5mm Heads

Loose upholstery edges and bare furniture details can make a finished piece look incomplete. These decorative tacks add a visible metal accent while fastening material to a wooden surface.

The box includes 200 tacks, so it can cover a small project or leave extras for later repairs.

They’re also intended for lightweight display jobs, such as pinning photos or paper to a corkboard. The iron construction and listed dimensions are worth considering before you choose them for a project.

Best use cases

Use these tacks for decorative work on sofas, headboards, wooden furniture, jewelry boxes, and other DIY projects. Their 9.5mm heads are large enough to show as part of the design, rather than disappearing into the surface. For example, you could space them along the edge of a headboard or use a few to dress up a small wooden box.

They can also secure paper or photos to corkboard. That makes them more versatile than upholstery-only fasteners, though their decorative heads may be more noticeable than plain pins. You’ll appreciate it if the fastener is meant to contribute to the look, not just hold something in place.

Product specs

The product is described as imported iron, with a brass decorative style. The listing gives a head diameter of 9.5mm (0.37 inches), a nail length of 17mm (0.67 inches), and a shank diameter of 1.4mm (0.055 inches). Each box contains 200 pieces.

Those measurements help set expectations: these are small decorative tacks, not a substitute for larger fasteners when a project calls for more substantial hardware. The available information does not specify a load rating or a particular upholstery fabric, so choose them for the intended decorative and light fastening tasks rather than assuming they suit every repair.

For installation, the product guidance recommends a rubber hammer to help protect the tacks’ appearance. A rubberized tack hammer can also be used, along with a nail spacer or needle-nose pliers to help position them. If you’re lining up a row, placing the tacks before tapping them in can make spacing easier to manage.

Where it shines

The main appeal is the combination of a visible head and a relatively slim shank. That suits projects where ordinary pins would look too plain, while the 200-piece quantity gives you room to repeat a pattern across a piece of furniture or keep some on hand for small craft work. What if the fastener itself is part of the finished design? That is where a decorative tack has an advantage over a basic pin.

The brass description should not be read as proof that the tacks are made from solid brass: the material listed is iron. From the way it is set up, these make the most sense when appearance and small-scale fastening matter more than a stated heavy-duty capacity.

When it makes sense

Choose these when you want matching decorative points for a furniture or craft project and the listed head and nail sizes suit the job. For paper or photos on corkboard, they offer a more pronounced finish than a basic pushpin. It’s not for you if you need a specified holding strength, a larger fastener, or confirmed compatibility with a particular fabric or surface, those details aren’t provided.

The installation advice also matters if you want to keep the heads looking good: a rubber hammer is suggested, so a standard hard hammer may be a less suitable choice for careful placement. If your project is small, decorative, and measured around the stated dimensions, this 200-count set has a clear use. For structural fastening or repairs where strength is the deciding factor, choose hardware with a documented capacity instead.