UGUESS PLA+ 3D Printer Filament, Red, 1.75 mm, 1 kg, ±0.03 mm
Product description
Getting the most from it
The 1.75 mm red PLA+ filament comes on a 1 kg spool, ready for FDM printing in a vivid, solid color. Its stated diameter tolerance of ±0.03 mm supports consistent feeding and extrusion, while the neatly wound strands are designed to feed smoothly. Use it for colorful miniatures, figurines, seasonal decorations, and DIY projects where a uniform red finish is part of the design.

For everyday printing, the manufacturer recommends a nozzle temperature of 200–220°C, a build plate temperature of 40–60°C, and a print speed of 50–200 mm/s. These ranges offer a practical starting point for setting up a print, adjust for your printer and the model you are making.


Pros

A consistent solid color gives decorative prints a clear, cohesive look, from small figures to larger display pieces. The ±0.03 mm diameter tolerance is intended to support steady extrusion and layer adhesion, useful when a model has visible details or a smooth surface matters. Automated winding, followed by a manual quality inspection, keeps the filament strands neatly aligned to help reduce tangles during feeding. That makes the spool straightforward to handle for both new hobbyists and regular makers.
The filament is factory-dried and vacuum-sealed with desiccant. Together with its orderly winding, these details support steady feeding as you work on a print. Compared with choosing a neutral filament and adding color afterward, this red PLA+ provides color throughout the printed material, making it a practical choice for single-color models and seasonal projects.



Quick overview
UGUESS PLA+ is red, has a 1.75 mm diameter, and comes in a 1 kg spool. It is designed for most mainstream FDM 3D printers, so check that your printer uses 1.75 mm filament and supports PLA before loading it. The stated dimensional tolerance is ±0.03 mm. The recommended settings are a 200–220°C nozzle, a 40–60°C build plate, and a print speed of 50–200 mm/s.

For example, a maker planning a set of red holiday figurines can use the same solid-color spool across the project, then display the finished pieces as a coordinated group. Its bright red color also suits small gifts, decorative models, and desk or shelf displays.


What to clarify

What type of printer is this filament designed for? It is intended for most mainstream FDM 3D printers. The printer should support 1.75 mm filament and PLA material.
What print settings does UGUESS recommend? The suggested ranges are 200–220°C for the nozzle, 40–60°C for the build plate, and 50–200 mm/s for print speed. Use them as a starting point for your printer and print.

How much filament is on the spool? The spool contains 1 kg of red PLA+ filament, suitable for projects ranging from small miniatures to larger decorative prints.
Is it worth it?
This spool is a focused choice for FDM users who want red PLA+ in a familiar 1.75 mm format, with a clearly stated tolerance and recommended print settings. Its solid color suits models meant to look finished straight off the printer, while the neatly wound filament makes it convenient for a run of related pieces or occasional creative projects. Choose it for colorful miniatures, figurines, seasonal crafts, and display models when red is the color you want built into the print.
Products with discounts that might interest you
- UGUESS PLA+ 3D Printer Filament Bundle, 8 Colors, 1.75 mm, 1,600 g
- ACESAY 95A TPU 3D Printer Filament, 1.75 mm, 8 Colors, 200 g Spools
- UGUESS Silk PLA+ 3D Printer Filament, Tricolor Gradient, 1.75 mm, 1 kg
- Amoybaby AM-011004A-10-01-US Silk Purple PLA Filament, 1.75mm, 1kg
- UGUESS Silk PLA+ 3D Printer Filament, Red-Blue-Green, 1.75mm, 1KG
- ANYCUBIC PLA Filament Refill, 1.75mm, 1kg Brown, ±0.02mm Accuracy
- Colourbing Silk Dual-Color PLA+ Filament, 1.75mm, Dark Purple & Teal, 1KG
- Creality Hyper ABS 1.75mm 3D Printer Filament, Black, 1kg Spool, ±0.05 mm
- ELEGOO ASA 1.75mm 3D Printer Filament, Deep Black, 2 kg, UV Resistant
- ERYONE Fossil Matte Gradient PLA Filament, 1.75 mm, 1 kg Spool
- eSUN TDP137 Matte PLA Filament, 1.75 mm Dark Gray, 1 kg Spool
- FilaBees FilaBees-ASA-Burnt Titanium ASA Filament, 1.75mm, 1kg
- FLASHFORGE Rapid PETG Filament, 1.75 mm, Metallic Gray, Up to 600 mm/s
- FoxAlien Masuter 3S CNC Router Machine 400W spindle
- Frucindra 4KG PETG 3D Printer Filament, 1.75mm, 4 Colors, 1KG Spools
- SUNLU DCUS-PETG-OK-1KG PETG 3D Printer Filament, 1.75mm, Oak
- ANYCUBIC PETG Filament Refill, 1.75mm, 1 kg Black, ±0.02mm
- SPTA 6" (150mm) 100% Natural Wool Polishing Pads (SPTA) — Hook & Loop Set, 4 pcs with 5/8-11 Backing Plate
- Meuymeu Blue White Silk Rainbow PLA+ 3D Printer Filament, 1.75mm, 1KG
- SUNLU Rainbow PLA Filament Bundle, 1.75mm, 4 × 250g Spools
- SUNLU PLA Plus 3D Printing Filament, White 1.75mm, 4 kg Bundle
- SUNLU Flexible TPU Filament 1.75mm, 95A, 10kg, 10-Pack
- UGUESS TPU 3D Printer Filament 1.75mm
- SUNLU Silk PLA+ Filament, 1.75mm, Gold and Silver, 2kg, Glossy Finish

