TRQ Semi-Metallic Brake Pads Front & Rear Kit for 2009 Ford F-150 (Reference 4L3Z2200AB, 6L3Z2200AB, 6L3Z2200CD, 8L3Z2200A, 9L3Z2001A, AL3Z2200A, BL3Z2200C, EHT1012AH, EHT1012H)
Product description
What this kit is for
If you’re planning brake service on a 2009 Ford F-150, this TRQ semi-metallic front and rear brake pad kit is built around a simple idea: make a DIY replacement feel straightforward. It includes a set for the front and a set for the rear, both described as direct replacements (so you’re not hunting for weird adapters or improvising during install).
The “semi-metallic” angle matters because it typically targets drivers who want performance-oriented braking rather than an ultra-soft, budget-only feel. That said, brake pads aren’t one-size-fits-all—how they feel can vary based on driving style, heat, and rotor condition. So it’s worth thinking about what you expect from your braking before you lock in.
The essentials: what you get

This package is sold as a complete front-and-rear pad replacement kit. You receive: - 1 front semi-metallic brake pad set - 1 rear semi-metallic brake pad set
It also lists multiple reference numbers to help you confirm the right application. The references shown include 4L3Z2200AB, 6L3Z2200AB, 6L3Z2200CD, 8L3Z2200A, 9L3Z2001A, AL3Z2200A, BL3Z2200C, EHT1012AH, and EHT1012H.
If you’re used to buying parts based on “does it fit?” alone, this kit pushes you toward a more careful check—usually a smart move with brakes.
Key takeaways on fit and installation



TRQ positions these as direct-fit replacement parts designed to match the original equipment configuration. The brand also emphasizes two practical steps before purchase: confirm fitment using the amazon Garage “confirmed fit” feature and review the full compatibility chart.
That’s the part you shouldn’t skip. Even when a listing sounds perfect for your vehicle, brake pad applications can be picky. Ten minutes spent confirming reference numbers and fitment details can save you a week of frustration.
On the install side, the kit is described as pre-assembled components intended to eliminate the need for modifications. Over the life of a DIY project, that can be the difference between “I can handle this” and “why are these holes not lining up?”
What stands out (and what might not)

What stands out here is the purchase logic: a full front + rear semi-metallic pad kit, with the expectation that it’s meant to be swapped in as a direct replacement. That’s especially helpful if you like doing the job once—front and rear together—rather than spreading it out across months.
However, here’s the limitation to keep in mind: the product info you provided doesn’t include performance specifics like noise behavior, rotor compatibility details, or wear characteristics. Semi-metallic pads can be great for drivers who want stronger bite, but if you’re very noise-sensitive or your rotors are already uneven, you may find the overall braking experience depends as much on the condition of what you’re installing on.
Practical micro-scenario: what it feels like to install
Picture this: you’ve got the truck safely supported, the wheels off, and you’re ready to tackle pads. With a kit like this described as a direct replacement, your workflow is typically “remove old pads, install new sets, reassemble, then bed-in per your brake plan.”



If the fitment truly matches OE-style configuration, you’re mostly dealing with standard hardware and alignment—rather than custom grinding or part-mismatch troubleshooting. That’s the kind of install-day peace of mind that DIYers tend to care about.
Who it suits best—and who should look elsewhere
It’s a strong match if you: - own a 2009 Ford F-150 and want a front-and-rear semi-metallic pad kit - prefer a direct-fit approach that aims to avoid modifications - are willing to confirm compatibility using the provided fitment tooling and reference numbers
It may not be your best pick if you: - want highly detailed, performance-verified guidance (the provided info is mainly about fitment and installation intent) - haven’t checked whether your vehicle’s application matches the listed reference numbers - are expecting a one-and-done solution that ignores rotor condition—brakes are a system, and pads can only do so much

Should you buy it?
This TRQ brake pads kit makes sense if your priority is a DIY-friendly, front-and-rear semi-metallic replacement for a 2009 Ford F-150, backed by a direct-fit installation approach. The references listed (including 4L3Z2200AB and others shown) give you the tools to verify the right application—just make sure you actually do that confirmation step before ordering.
Don’t buy it blindly if you’re not confident about compatibility. And if you’re expecting detailed braking behavior (like quietness or specific stopping feel under your driving conditions), you’ll want more information than what’s shown here.
Quick FAQ



How do I confirm the pads fit my 2009 Ford F-150?
Use the Amazon Garage “confirmed fit” feature for your vehicle and cross-check the reference numbers listed in the product details against your application.
What’s included in the kit?
It includes one front semi-metallic brake pad set and one rear semi-metallic brake pad set.
Are these pads meant for DIY installation?
They’re described as pre-assembled direct replacements designed to reduce the need for modifications, which is generally the kind of setup DIYers look for.
What does “semi-metallic” tell me?
It indicates the pad material approach. The main takeaway is performance-oriented braking characteristics, but real-world feel can vary with driving style and rotor condition.
metadescription note
If you want to keep your buying decision grounded, focus on compatibility confirmation first—then the kit’s front-and-rear coverage becomes the easy part.
Products with discounts that might interest you
- TRQ Rear Wheel Cylinder W37420
- Bendix SBC2218 Ceramic Front Brake Pads for Mazda 3 (2019–2024)
- TRQ Vented Brake Rotor Set
- Bosch BC1324 QuietCast Front Ceramic Brake Pads with Multilayer Shims
- QUALITY-BUILT Front Brake Pads BP1303M
- Eoppen 1/4-Inch x 25 ft Brake Line Tubing Kit, Zinc-Coated Alloy, 16 Fittings
- Bendix ceramic front brake pads SBC1645
- smseace 26Pack 3/16 Brake Line Kit
- GM Genuine Parts 84693643 Front Disc Brake Pad Wear Sensor (Front)
- Tnisesm 40-Piece Brake Line Fittings Kit, 1/4-Inch SAE Inverted Flare
- Dorman Rear Drum Brake Wheel Cylinder W37625
- TRQ W57146 Wheel Cylinder 3/8 Thread
- Acinoparts ABK00201 Front and Rear Brake Kit with Drilled Rotors and Ceramic Pads
- Tnisesm 102-Piece Brass Brake Line Fitting Kit, 3/16 and 1/4-Inch
- Acinoparts ABK01001 Brake Kit for GMC Terrain and Chevy Equinox, Drilled Rotors
- TRQ Disc Brake Caliper for Silverado
- Raybestos Disc Brake Rotor 980342
- QUALITY-BUILT Parking Brake Shoes FPS771
- Dynamic Friction Company DFC Front Left Brake Hose for Jeep Wrangler and Gladiator
- Orion Brake Caliper Wind Back Kit
- Orion Motor Tech Speedy Brake Caliper Compressor Tool
- Orion Motor Tech 3L Vacuum Brake Bleeder Kit with Refill Bottle and 18 Adapters
- Yofond Brake Tool: 4-in-1 Universal Caliper Piston Tool with 360° Ratcheting
- MAYESAR Brake Caliper Tool 360°

