SURAIELEC FGF787FGG787FBGDFGG Wireless Light Switch Kit, 15A RF, 100-ft Range

If you need to add a switch where running new in-wall wiring would be disruptive, this SURAIELEC wireless kit lets you control a light with a wall-mounted RF switch and receiver. The receiver connects between power and the light, while the switch can be placed separately for more flexible control.

For a single control point, use the included switch and receiver, for a multi-location setup, the kit can expand with additional SURAIELEC transmitters and receivers. It uses RF rather than Wi-Fi, so remote operation does not depend on a wireless network.

Highlights

Rated for 15A and 1,875W, the kit works with lights, sockets, and fans within that rating. Its 100-foot range is designed to send the RF signal through walls and doors, making it useful when the control point is not beside the fixture. The receiver uses dynamic codes, allowing multiple sets in one room to operate independently. Add compatible SURAIELEC transmitters to control one device from multiple locations, or receivers to control multiple devices with one remote.

The receiver is rated IP54 for use in outdoor-lighting setups, while the wall switch must remain indoors. Customers often highlight the remote-control convenience, straightforward installation, and familiar appearance of the wall switch. Some also appreciate using the kit as an alternative to rewiring an existing fixture.

Size & fit

The listed item dimensions are 4.57 x 2.8 x 0.67 inches, and the switch is designed for wall mounting. A mounting bracket is included for positioning the wireless switch. The receiver fits standard control boxes and must be wired between the power supply and the lamp. A neutral wire is required at the receiver, so plan its placement where that connection is available. The kit is rated for 125V AC.

Usage tips

Choose a location for the switch that is convenient to reach, then install the receiver between power and the light, observing the neutral-wire requirement. Once paired, the pre-programmed set is ready to use. For a three-way or four-way arrangement, or to operate several devices, add compatible SURAIELEC transmitters or receivers as needed. The receiver can be used with outdoor lighting, keep the wall switch indoors. Its RF control is useful for lofts, attics, and other locations where a wireless switch can provide a more practical control point than a newly wired wall switch.

Before you decide

Does the receiver need a neutral wire? Yes. The receiver requires a neutral wire. If one is not available in the switch box, the manufacturer describes installing the receiver behind a non-metal light fixture where a neutral connection is available.

Can I use the kit for outdoor lights? The receiver is weatherproof and rated IP54 for outdoor-lighting applications. Keep the wall switch indoors, and use the receiver to control the outdoor light remotely.

Can multiple kits or switches be used together? Yes. Dynamic codes support independent operation of multiple sets. The system can also be expanded with additional SURAIELEC transmitters and receivers to control one device from multiple switches or multiple devices from one remote.

When it makes sense

This kit suits a lighting setup that needs a new or more convenient control point without adding in-wall wiring for the switch itself. It combines a wall-mounted RF control, a receiver rated for common lighting and fan loads, and expansion options for multi-location control. For a hard-to-reach fixture, a room with multiple control points, or outdoor lighting operated from indoors, those features make wireless control the practical focus.