GHome Smart Light Switches 2-Pack

Technical details

Households looking to add app and voice control to ordinary lights may find this two-pack useful, provided the switches match their wiring. Each is a single-pole Wi-Fi switch that requires a neutral wire and a 2.4GHz network, it does not need a hub. The listed ratings are 120V/60Hz, 15A maximum, and up to 1800W. The cover measures 4.73 × 2.76 × 0.35 inches, and the internal dimensions without the cover are 4.1 × 1.75 × 1.34 inches. Four jumper wires are included.

UL and FCC listings, flame-retardant material, and overload protection are noted in the product information. Those details do not change the main buying check: the switch is intended for a standard single-pole setup, not every lighting circuit.

Compatibility

The switches work with Alexa and Google Assistant, as well as the GHome app for remote control, schedules, timers, and group management. Set them up on 2.4GHz Wi-Fi first, then connect the product through the app before using voice commands. A practical use is scheduling a porch light to turn on after sunset and off before sunrise, or switching bedroom lights off at a set time without relying on a voice command.

It makes sense if you want scheduled or remote control for compatible single-pole lights and already have the required neutral wire. You may want to skip it if your circuit is three-way, uses a dimmer, or has smart bulbs: those setups are listed as incompatible. It also won’t join a 5GHz-only Wi-Fi network, so a dual-band router needs to provide a 2.4GHz connection.

Usage tips

Before choosing, identify the circuit type and confirm that a neutral wire is present, the product information doesn’t describe installation steps, so don’t treat the included jumper wires as a substitute for checking your wiring. If you’re uncertain about the circuit, get qualified help rather than guessing. Once the switch is connected, the app can show lighting status by room and manage multiple switches together. Schedules can be set around a daily routine or sunrise and sunset, while Away Mode is described as a way to simulate presence when traveling.

The listing also recommends following the app prompts and updating the firmware to version V1.1.3. On the spec sheet, that’s the stated update guidance, it’s worth allowing for app setup and network configuration before expecting voice control to work. Buyers who only need a basic wall switch may not benefit from the added app and automation features, while people seeking dimming or broader circuit support will need a different type of switch.

Questions before you buy

Does this switch require a neutral wire? Yes. The product information says a neutral wire is required.

Can it connect to a 5GHz Wi-Fi network? No. It supports 2.4GHz Wi-Fi only.

Will it work with a three-way circuit or dimmer? No. The listing excludes three-way circuits and dimmers, and also says the switches are not compatible with smart bulbs.

Final verdict

This GHome two-pack is aimed at replacing compatible single-pole switches with app, voice, and schedule control—not at adding every smart-light feature to an existing circuit. It’s a sensible fit when you’ve confirmed the neutral wire, have 2.4GHz Wi-Fi, and want routines such as an automatic porch-light schedule. Choose another approach if your wiring is three-way, you need dimming, or you want to keep smart bulbs in the circuit. Those compatibility limits matter more here than the convenience of controlling lights from an app.