Storage Bin Labels, 3×5-Inch Card Holders

Fit and sizing

If you want labels that stay with a bin, these clear adhesive pockets offer a more permanent-looking setup than loose cards tucked under a lid. They’re made to hold standard 3×5-inch index cards.

Each pocket measures 3.7 × 5.3 inches on the outside, so leave room for the holder itself when choosing a spot. The top-open design lets you slide a card in or pull it out, and a semicircle cutout gives you a place to grip it.

Picture a row of storage totes on a closet shelf: a card marked “winter gear” stays visible on the front, so you can check the contents without pulling down each box. That’s the main convenience here—read the label first, then open only the bin you need.

Pros

• The clear pocket keeps the card visible while helping shield it from water, dust, and fingerprints, as described in the product details.
• The pack includes 44 holders, useful when you’re labeling several bins, drawers, or file cabinet contents in one organizing pass.
• The adhesive backing is intended for flat, clean surfaces, including metal, wood, glass, and paper.
• Cards can be inserted and removed through the open top, so you can change a label without replacing the pocket.
• The product is described as removable without residue, which may be helpful if your storage layout changes.

A practical limitation: the adhesive is specified for flat, clean surfaces, so textured, dusty, or curved areas aren’t an established use case. The pockets also have to be paired with 3×5-inch cards, smaller cards may not fill the label area as intended. From the way it is set up, this is a labeling system for readable, replaceable cards rather than a solution for printing labels directly onto each container.

Spec sheet

• Type: Clear adhesive index-card pockets
• Quantity: 44 pieces
• Card size: 3 × 5 inches
• Pocket outer size: 3.7 × 5.3 inches
• Design: Top opening with semicircle cutout
• Stated features: Waterproof, dustproof, fingerprint-resistant, removable without residue
• Suggested surfaces: Flat, clean metal, wood, glass, or paper

When it makes sense

It’s a great fit if you want one consistent way to identify storage totes, drawers, lockers, or file cabinet contents and expect to use written cards that may need updating. The clear fronts make the label easy to read while the contents stay inside, which is handy when bins are stacked or stored out of reach.

It may not suit you if you need labels for rough or curved surfaces, or if you’d rather write directly on a container and avoid inserting cards. Would you rather replace a card than peel off and rewrite a label every time the contents change? If so, the pocket format has a clear practical advantage. For a simple setup, use a 3×5-inch card, slide it in through the top, then apply the pocket to a flat, clean part of the container where the label will remain visible.