Steauty 12V Fuel Transfer Pump 85 GPH ⛽

This 12V fuel transfer pump moves fuel quickly for vehicle, boat, and equipment refueling, offering a compact solution when you need to transfer gasoline or diesel on the go. With a rated power of 70W it can move up to about 80–85 gallons per hour according to the manufacturer, making it useful for roadside fills, marine tanks, and farm machinery maintenance.

Key Points

The pump runs from a 12V supply and includes both an 11.5 inch cigarette lighter plug with DC connector and an 11.8 inch alligator clip cable for battery connection, which gives flexibility when shore power is not available. It comes with an upgraded carrying case and a pulley lead pipe that uses a steel wire stress point to help feed the suction tube through curved tank openings. Note that flow rate depends on delivery height and fuel viscosity, and using the inline fuel filter may reduce maximum flow slightly. ⚙️

Technical Specifications

• Name: Steauty 12V Fuel Transfer Pump Set
• Rated power: 70W
• Rated voltage: 12V
• Open flow: 6 L/min (approximately 1.59 gal/min)
• Hose diameter: inner 8 mm, outer 12 mm

Usage Recommendations

Install the suction hose so the pulley conduit and steel wire can guide the pipe to the tank bottom for more reliable pickup. Operate the unit only from a 12V DC source, using the included cigarette lighter plug or battery clips. Avoid connecting to 110V AC to DC converters such as typical car battery chargers because the pump is not intended for those power supplies. 🔧

Practical Considerations

For long runs or elevated discharge points expect lower flow than the nominal rate due to head pressure and fuel thickness. The set is suitable for gasoline and diesel, and the components are intended for portable refueling tasks on cars, boats, RVs, UTVs, and small farm equipment. Consider that the inline filter and tight bends in the hose can reduce throughput, so check hose routing when consistent high flow is required. ⛽