StarTech.com DisplayPort to HDMI cable 10ft

This 10ft DisplayPort to HDMI cable connects a DisplayPort PC or laptop to an HDMI monitor or TV and simplifies a multi-screen setup with reliable UHD video and multichannel audio. The DisplayPort to HDMI cable supports up to UHD 4K 30Hz according to the manufacturer and carries 7.1 channel audio, so you can stream video and sound without extra adapters. It is passive and tested for DP++ hosts, making it a convenient desk or home office accessory.

Key points

The cable reduces clutter by integrating the converter chip into the HDMI end, so installations look tidy and routing is easier across an office or living room. The latching DisplayPort connector helps prevent accidental disconnection when moving equipment or adjusting cables. Setup is plug and play with no drivers required, so the cord works across operating systems and most docking stations. Note that it requires a DP++ source to pass audio and video, according to the manufacturer, so check host compatibility if your device lacks DP++ support. 📺

Tech specs

• Name: StarTech.com DP2HDMM3MB
• Length: 10ft 3m
• Video: UHD 3840x2160 30Hz and 1080p
• Audio and DRM: 7.1ch Audio, HDCP 1.4 and DPCP
• Connector: Latching DisplayPort to HDMI male

Practical tips

Route the cable along desk edges and behind furniture to keep the integrated adapter chip close to the display port and minimize bending near connectors. For best results with 4K content make sure source settings output at 30Hz or lower and that HDMI display accepts HDMI 1.4 signals. If you plan to switch displays often the latch will keep the cable secure while the passive design keeps power draw low. The compact HDMI connector design reduces signal loss for clearer images and sound, but remember it is a passive adapter so it depends on host DP++ support for full functionality. 🎯