POWSAF Wall Outlet Surge Protector with 5 Outlets

Quick overview

When one wall outlet has to handle chargers, lamps, and other small electronics, this POWSAF extender adds plug-in options without a separate power strip on the floor.

Its three-sided layout combines five AC outlets with four USB ports, including two USB-C ports. A built-in night light adds a little guidance in a dark room.

For a bedside or hallway outlet, that means you can plug in a lamp and charge a phone in the same spot. Keep in mind that this unit is not compatible with GFCI outlets.

Best use cases

The five AC outlets are spaced 2.1 inches apart, which gives larger plugs more room than closely packed sockets. That layout may help when you need to connect a mix of adapters instead of choosing between them, though the extender still uses just one wall outlet. Its 1680-joule surge protection is specified for connected devices, this is a plug-in solution, not a replacement for adding outlets around the room.

The four USB ports—two USB-A and two USB-C—are useful for charging devices without occupying an AC socket with a separate USB adapter. The USB-C ports support PD 20W, and the listed total USB output is 35W. It suits you if you want several charging connections and a soft light around an outlet, especially in a bedroom, nursery, or hallway.

Not the best choice if you need a GFCI-compatible extender, or if your USB-C device requires a charging voltage of 14–22V. The product notes that those devices are unsupported and recommends using the original charging cable.

Tips for day-to-day use

The night light has a dusk-to-dawn sensor, so it can switch on when the room gets dim. A touch sensor offers three brightness levels, and you can also turn the light on or off manually. For example, place it near a bedroom doorway and use a lower setting to see the outlet without leaving a bright light on overnight.

The three-sided shape is intended to keep plugs accessible from different directions. Before plugging in larger adapters, look at how their bodies will sit against neighboring sockets, the wider spacing helps, but it cannot guarantee that every unusually bulky plug will fit alongside another. For USB-C charging, stick with the original cable as recommended in the product details.

Questions before you buy

Will it work with a GFCI outlet? No. The product information says it is not compatible with GFCI outlets, so check the outlet type where you plan to use it.

Can the night light stay off? Yes. It can be controlled manually, as well as using its dusk-to-dawn sensor and touch-adjustable brightness.

Can every device charge through USB-C? No. Devices that need 14–22V charging voltage are not supported by the USB-C ports. The product also recommends using the original charging cable.

Should you buy it?

Choose this extender if your main problem is too few accessible connections at one indoor outlet, and you also want USB charging and a small night light in the same unit. It brings more connections into reach without the floor-level footprint of a conventional power strip. If you need GFCI compatibility, support for the excluded USB-C voltage range, or outlets distributed across a wider area, a different setup will fit those needs better.