PDKLIN Side Mirror Cap Covers ABS
Product description
What matters most
When the factory mirror caps look a little plain, these chrome covers add a more reflective accent without replacing the original parts. They’re trim pieces for the side mirrors, not replacement caps, so the idea is to change the look while keeping the existing mirror assembly.
The covers are made from ABS plastic and have a cutout for the mirror light. The listed fitment is Jeep Wrangler JL and JLU models from 2018 onward, plus Jeep Gladiator JT models from 2020 to present. Check that your mirror layout matches the light cutout before choosing, a trim piece that doesn’t line up will be a poor fit regardless of its finish.
The product name lists two pieces. The maker describes the chrome finish as polished and says the covers are intended to resist dust, scratches, fading, and corrosion. Those are claims, not independent test results, so treat them as an indication of the intended use rather than a guarantee of how the finish will hold up over time.
How to use it
Installation uses the attached double-sided automotive tape. Clean the area where the cover will sit, dry it with a towel or tissue, remove the tape backing, and align the piece with the mirror before pressing it down. The maker says to press by hand for 20–30 seconds or longer.
Keep in mind that this is an adhesive-on trim installation, not a replacement secured in place of the original mirror cap. Take a moment to line up the light cutout and edges before pressing firmly, once the tape is in contact, repositioning may be less convenient. The instructions also call out surface cleanliness and dryness, so don’t rush that part.
Practical tips
Before starting, hold each cover against the mirror and check its orientation, including the light opening. For example, if you’re adding the trim in the driveway, test the alignment on both sides first, then apply one cover at a time on a clean, dry surface and press it down as directed. That small pause helps avoid an obvious crooked edge or a cutout that sits off-center.
These covers suit someone who wants a chrome styling change without taking apart the mirror. A more involved replacement part may make more sense if your existing cap is damaged and needs to be replaced rather than dressed up. The tape is part of the installation, so the result depends on it adhering to the prepared surface, the listing says the merchant can help if the tape does not stick.
Questions before you buy
Will these replace my factory mirror caps? No. The listing identifies them as trim covers, so they attach over the existing caps.
Which vehicles are listed as compatible? Jeep Wrangler JL and JLU from 2018 onward, and Jeep Gladiator JT from 2020 to present. Match your mirror and light opening to the cover before ordering.
Do they require tools to install? The provided instructions describe using the attached double-sided tape, cleaning and drying the surface, aligning the cover, and pressing it by hand. No tool requirement is stated.
Should you buy it?
It makes sense if you want a chrome accent on compatible Jeep side mirrors and your existing caps are in good shape. The light cutout and listed vehicle fitment give you specific details to match before committing. Not the best choice if you need a replacement mirror cap, prefer a non-chrome look, or don’t want an adhesive-mounted accessory. The maker also mentions support if the tape does not stick, but the listing doesn’t provide a separate maintenance routine or long-term durability test.