OMT M12x1.25 Lug Nuts, 20-Piece Set with 60° Cone Seat and Socket Key
Product description
The 60° conical seat is designed to match wheels that use this lug-nut seat style, helping you choose hardware suited to the wheel’s contact point. Each nut has an M12x1.25 thread for vehicles that require that size.
This 20-piece set includes a socket key and instructions, bringing the wheel nuts together in one package for a replacement or wheel-change project. The black finish gives the hardware a consistent look across the set.

Made from alloy steel, the lug nuts are cold-forged and heat-treated as a single piece. Their black-oxide finish adds corrosion resistance, while reported proof-load, salt-spray, hardness, and thread checks speak to the testing performed on the set.
Usage tips



Before installation, match the lug-nut thread and seat to the requirements of your wheel and vehicle. This set uses an M12x1.25 thread and a 60° conical seat, the hex is 17mm. Using the supplied socket key, install and remove the nuts with a tool suited to the job, following the included instructions. Matching the seat style matters because it determines how the nut contacts the wheel.
The open-end design leaves the end of each nut open rather than enclosed. That makes this style distinct from closed-end hardware when selecting replacement nuts. The listed dimensions are 1.89 inches long by 0.87 inches wide, useful details to compare against the space available around the wheel.

Tech specs
- Type: Open-end hex lug nuts
- Thread size: M12x1.25
- Seat: 60° conical
- Hex size: 17mm
- Material: Alloy steel, single-piece, cold-forged and heat-treated construction
- Exterior finish: Black oxide
- Dimensions: 1.89 inches long by 0.87 inches wide
- What’s included: 20 lug nuts, one socket key, and instructions



Pros
The set is packaged for a full group of 20 wheel nuts, with one socket key included for installation and removal. A matching key keeps the tool for these nuts together with the hardware, while the included instructions provide guidance for using the set.

The combination of a specified M12x1.25 thread and 60° cone seat makes the fit details clear when comparing replacement hardware with a vehicle’s wheel requirements. Alloy-steel construction, cold forging, heat treatment, and a black-oxide finish are practical features for wheel hardware intended for repeated fitting and removal. The manufacturer also reports proof-load, salt-spray, hardness, and thread checks.
The product listing names Infiniti Q45, Q50, Q70, G25, and G37, Nissan Titan, Versa, Altima, Maxima, and Rogue, Subaru Forester, BRZ, Crosstrek, Outback, and Legacy, and Suzuki Swift and Vitara. These names provide a useful starting point for checking fit, alongside the thread and seat specifications.



What to clarify
What comes in the set? The package includes 20 M12x1.25 lug nuts, one socket key, and instructions for use.
What seat and hex does this hardware use? Each nut has a 60° conical seat and a 17mm hex. Match the seat style and thread size to the wheel and vehicle requirements.
Which vehicles are named in the listing? The listed models include select Infiniti, Nissan, Subaru, and Suzuki vehicles, including the Q50, Altima, Forester, and Vitara. Use the M12x1.25 thread and 60° seat details when checking a specific application.
When it makes sense
Choose this set when your wheel setup calls for M12x1.25 open-end lug nuts with a 60° conical seat and you want 20 matching nuts in one package. Its black-oxide finish, included socket key, and clearly stated fit dimensions make it a practical choice for replacement or wheel changes where those specifications match.
Products with discounts that might interest you
- Orion Motor Tech M14x1.5 Lug Nuts with 60° Cone Seat (Set of 32)
- TICONN 4.80/4.00-8 Inner Tubes, 2-Pack with TR-13 Straight Valve
- Orion Motor Tech 4347512331 M14x1.5 Lug Nuts, 7-Spline, 60° Cone Seat
- Zeyitian ASK02 Tool-Free Steering Wheel Spinner with Metal Bearings, Black
- Orion Motor Tech Wheel Hub Removal Kit 5‑8 Lug 🛠
- 12x1.5 Wheel Lug Nuts (20-Pack) Chrome Closed-End Bulge Acorn, 60° Cone Seat, 19mm Hex
- M12x1.5 Lug Nuts 20PCS wheel lug nut set
- BDFHYK BD-05-06062S1BK-VC 1-Inch Wheel Spacers, 6x139.7 mm, Set of 4
- Orion Motor Tech 6CLC-8S Spike Lug Nuts, M14x1.5, Chrome, 32-Piece
- DNA Motoring 3 Ton Low Profile Floor Jack — 7.7–21"
- Orion Motor Tech M14x1.5 Spike Lug Nuts 24 🔩
- dynofit 24pcs 14x1.5 Lug Nuts 21mm
- FLYCLE automotive-lug-nuts Lug Nuts, M12x1.5, Black, 20-Piece Set
- GICOOL 13x5.00-6 Inner Tubes, TR-13 Straight Valve, 2-Pack
- MIKKUPPA QLN411 M14x1.5 Lug Nuts, 32-Piece Chrome, 60° Seat
- ROGTZ Electric Hydraulic Car Jack 5 Ton with Wrench 🛠
- SCITOO 115486 1.5-Inch 8x180 Wheel Spacers, 125mm Bore, 14x1.5 Studs
- SUCOSO 81359 M12x1.25 One-Piece Lug Bolts, 20-Pack, 17mm Hex
- Orion Motor Tech 9/16-18 Lug Nuts 32 Pack
- Orion Motor Tech M10x1.25 Lug Nuts for ATVs
- KSP 6X5.5 Wheel Spacers 25mm
- Uxcer Tesla Model 3/Y Leather Steering Wheel Cover
- Dynofit FF-N055P32 Spike Lug Nuts, M14x1.5, Black One-Piece Set of 32
- Dirt Bike Training Wheels for 50cc Kids Bikes (PW 50, Razor MX125/MX350) – Stainless Steel Stabilizers, Black

