NYYTGE Desk Clamp Power Strip with Nightlight, 40W Fast Charging (5 AC Outlets, 10FT Cord)
Product description
If your desk setup keeps “growing” faster than available outlets, a clamp-on power strip is one of those fixes that actually changes your day-to-day. The NYYTGE Desk Clamp Power Strip with Nightlight is designed to mount to the edge of a desk (specifically for 1.69-inch thick table edges), then feed power where you reach it—without turning your workspace into a cable nest.
On paper, it’s aiming at the in-between crowd: home office, studio corners, dorm-like setups, and smaller workbenches where you want convenient charging and a tidy look. Still, it’s not perfect for every layout—if your desk edge thickness doesn’t match the stated range, you’ll be stuck adapting or passing.
The essentials: what it is and why it’s useful
This is a desk clamp surge protector with a built-in charging hub. Instead of placing a standard power strip on the floor (where it tends to get kicked, tangled, and forgotten), it clamps to the underside/edge of your desk. That frees up space and keeps cords more organized. It also includes a nightlight with a touchscreen-style touch panel so you can adjust lighting levels without hunting for a separate lamp.
A practical micro-scenario: imagine you’re packing up at night—monitor off, game console still charging, phone on standby. You tap the touch panel to set the light to Low, plug everything in once, and you’re not searching around under the desk for the right charger in the dark.
What you’ll notice in use
The setup focuses on convenience and visibility. The nightlight is controlled by an intuitive touch panel with 3 brightness levels (Low/Medium/High). The illuminated icons are meant to stay readable when the room is dim, which is especially helpful if you work late or the desk area has limited overhead lighting.
On the power side, you get 5 AC outlets spaced out to reduce the “everything blocks everything” problem. Plus, there’s a combined USB charging section intended to power multiple devices at once—meant for laptops, lamps, and gaming gear.
And because the clamp is anti-slip and designed to keep cables organized, the strip’s job isn’t just power delivery—it’s reducing clutter so your workspace feels easier to manage.
Key takeaways on charging and surge protection
Charging-wise, the total fast charging output is listed as 40W. The hub is described with 4x20W USB-C PD ports plus 2 USB-A ports. That’s a lot of ports for one unit, so on a typical desk you can consolidate power instead of using multiple adapters.
For protection, it includes 1800J surge suppression and a V0 fireproof housing (as described). The manufacturer also highlights protection against short circuits and overheating. That’s a meaningful baseline feature for a clamp-on strip, since the device lives close to where people move around—under desks, near outlets, and next to frequently used gear.
Keep in mind, “total output” and “multi-device charging” can still depend on what you plug in at the same time. The unit is positioned to handle multiple devices without overloading by design, but you’ll still want to think about how your devices draw power.
Where it shines (and where it may not)
It makes sense if you want a space-saving power solution that clamps to the desk edge and keeps cords contained. If you’re building a cleaner workstation—minimalist desk, home office, or a small studio corner—this approach is often more satisfying than running extension cords all over the place.
It might not suit you if your desk edge isn’t compatible with the stated clamp fit (1.69-inch thick table edges). It also depends on clearance: the description says the 10FT heavy-duty cord and flat plug fit snugly against walls with about 0.4-inch to 0.5-inch clearance. If your wall/desk underside setup leaves less room than that, installation could be awkward.
Spec sheet (only the details that matter)
- Fits desk edges: 1.69-inch thick (clamp-on design)
- AC outlets: 5 spaced outlets
- USB ports: 4 USB-C PD ports (listed as 20W each) + 2 USB ports (USB-A)
- Total charging output: 40W
- Extension cord: 10FT heavy-duty cord
- Surge protection: 1800J surge suppression
- Housing: V0 fireproof housing (as described)
- Nightlight control: touch panel with 3 brightness levels (Low/Medium/High)
- Clamp/cable management: anti-slip clamp designed to keep cables organized
Should you buy it?
A solid pick if you need a desk clamp power strip that combines multiple AC outlets with USB charging, plus a built-in nightlight for late sessions or dim rooms. It’s especially attractive if you like the idea of keeping cables hidden under the desk and powering a laptop, accessories, and small gear from one place.
You may want to skip it if you don’t have desk edges that match the 1.69-inch fit requirement, or if your installation area can’t provide the clearance needed for the flat plug and cord positioning. Also, if you only need one or two devices powered, a simpler setup could be easier and take up less “built-in” space.
Quick answers (FAQ)
Usage tips
Start by checking your desk edge thickness against the stated clamp fit. Then plan where the unit will sit so the 10FT cord route stays tidy and doesn’t get pinched when you move chairs or adjust monitor arms.
What devices can it power?
The description indicates support for laptops and other desk gear through 5 AC outlets plus a charging hub made up of USB-C PD and USB-A ports. For exact device-by-device charging expectations, consider your device power needs and how many devices you’ll run at once.
Does it include surge protection?
Yes. It’s described as using 1800J surge suppression and a V0 fireproof housing, with added protection mentioned for short circuits and overheating.
Can you use the nightlight at different brightness levels?
Yes. It includes a touch panel with 3 lighting levels (Low/Medium/High) and illuminated icons for easier use in low-light conditions.
Is it meant for tight spaces?
It’s designed to mount under desks, shelves, or workbenches and keep a low-profile look, but it still relies on the stated clearance and desk-edge compatibility for smooth installation.