Nilight Side Marker Lights 2.5-inch

When a trailer, pickup, or RV needs visible side or clearance lighting, a multi-light set can make it easier to cover several mounting points at once. The Nilight 2.5-inch oval lights use amber LEDs behind white lenses and are designed for 12V direct wiring and surface mounting. Each light is rated at 80 lumens, with two LEDs, and the pack includes eight lights. The setup is practical for someone comfortable drilling mounting holes and connecting wires, but it is not a plug-in replacement for a vehicle that needs a different voltage or connector.

Key specifications

Each marker has a 2.5-inch oval format, a white PC lens, and an ABS housing. The listing states an IP65 rating for protection against dust and rain, and describes the lens as resistant to yellowing and the housing as resistant to impacts and corrosion. Those materials and the rating are useful details for exterior mounting, though they do not establish suitability for every exposure or installation condition.

The lights are made for 12V systems and use direct wiring rather than a plug connection. Each one has two LEDs and an 80-lumen output. The listed wire length is 7.08 inches. Installation calls for three holes per light: one for the wires and two for the screws. The instructions identify white as negative and black as positive, so matching polarity matters before fastening everything in place.

Who it’s for

This set makes sense for someone adding or replacing side marker, clearance, identification, or fender lights on a compatible truck, trailer, RV, SUV, van, camper, motorhome, boat, or bus. A practical example: when fitting markers along a trailer’s side, the eight-light pack gives you multiple units to position, while the oval surface-mount design keeps the job focused on fixed mounting points rather than a removable light.

A solid pick if you need several amber markers for a 12V project and are comfortable drilling and wiring them. Compared with a plug-in or tool-free lighting approach, this direct-wire design asks more of the installer: you’ll need to make the mounting holes and connect the positive and negative leads yourself. You may want to skip it if your setup isn’t 12V or you need lights that install without drilling.

What’s included

The package contains eight amber side marker lights with white lenses, plus two screws for each light. That gives you the listed hardware for mounting all eight units, but the description does not mention a wiring harness, connectors, or other installation supplies. Plan for the wiring connection separately if your project requires components beyond the supplied screws and light leads.

Practical doubts

Are the LEDs amber or white? The lenses are white, while the LEDs are amber.

Can I connect these to a 12V system? They are specified for universal 12V systems and direct wiring. The listing identifies black as positive and white as negative.

Is mounting tool-free? No. The stated installation requires three holes per light and screws to secure the housing.

Should you buy it?

Choose this Nilight set if you need eight surface-mount amber markers, have a 12V system, and can handle a drilled, hard-wired installation. The stated IP65 rating and PC/ABS construction are relevant for exterior use, while the 80-lumen output gives you a clear figure to compare with other marker lights. The main tradeoff is the installation work: if you need a simpler connector-based replacement or cannot drill the mounting surface, this set’s format is a poor match.