Monoprice 102819 Access Series 14 AWG CL2 Rated 2-Conductor Speaker Wire (50 ft)
Product description
If you’re running speaker wire through walls, the “can I use this inside?” question matters more than raw wire thickness. Monoprice’s Access Series 14 AWG 2-conductor speaker wire is built for in-wall installs thanks to a CL2-rated outer jacket, and it keeps things simple with a white jacket and color-coded conductors.
On paper, it’s a straightforward, no-nonsense choice: 50 continuous feet on a spool, 2 conductors, and bare copper described as 99.95% oxygen-free pure bare copper. But, depending on your local setup and your route, you’ll want to sanity-check that the CL2 rating and your installation method are truly what you need.
The essentials
This is a 14 AWG, 2-conductor speaker wire intended for residential class in-wall use where a CL2-rated jacket is relevant. Each conductor sits inside its own color-coded jacket, then everything is enclosed by the outer white jacket that’s identified as CL2 rated. In practical terms, that means fewer guesswork moments when you’re landing wires at the receiver/amp and at the wall speaker terminals.
Length is 50 continuous feet, wound on a spool, so it’s positioned for typical home runs—enough to cover a room-to-room or moderate distance without needing to splice mid-project.
What you’ll notice day to day
The biggest “real life” advantage here isn’t a flashy spec, it’s the installation-focused design. The outer white jacket is CL2 rated for safer use within walls (as described), while the inner conductor jackets are color-coded to help keep polarity consistent.
When you’re doing the job, you’ll probably care about a few things:
- Routing through a wall: the jacketed build is meant for in-wall workflows rather than being only a basic speaker lead.
- Keeping left/right and positive/negative straight: the color-coded inner insulation can reduce errors during termination.
One micro-example: imagine you pull the wire from a low wall cutout to a higher in-wall speaker location. Before you terminate, you untwist and separate enough conductor length to strip and connect. Because each conductor is already color-coded inside the outer jacket, you can label less and verify more quickly.
Key considerations before buying
This cable is very “installation-minded,” but it’s not perfect for every scenario. You may want to skip it if:
- Your project doesn’t involve in-wall routing where CL2 rating is required. In those cases, you could end up paying for features you won’t use.
- Your run is longer than you want to manage within one spool length. The entry here is 50 continuous feet, and going beyond that may push you toward additional cable or splicing.
Also, “safe for use within the walls of residential class buildings” is specifically how it’s framed in the base description. You’ll still want to align with your local code requirements and your building category before committing.
Who it makes sense for (and who it doesn’t)
It makes sense if you’re:
- Building a clean in-wall speaker setup and want a jacketed, CL2-rated approach.
- Doing DIY home theater or multi-room audio where you’ll appreciate color-coded conductors during termination.
- Planning a run around the 50-foot range and prefer a continuous spool.
It may not suit you as well if you’re only using the wire on exposed runs, or if your distances demand a longer continuous length than what’s included.
Tech specs
- Name: Monoprice 102819 Access Series 14 Gauge AWG CL2 Rated 2 Conductor Speaker Wire
- Type: 2-conductor speaker wire
- Format: Jacketed in white outer PVC jacket (CL2 rated)
- Size: 14 Gauge (14 AWG)
- Capacity: 50 continuous feet
- Material: Oxygen-free 99.95% pure bare copper conductors (as described)
- Color: White outer jacket, color-coded conductors inside
Is it worth it?
Buy it if your install involves in-wall speaker wiring and you specifically want a CL2-rated jacketed cable with color-coded conductors to reduce polarity mistakes. It’s a practical match for typical residential runs where 50 feet is close to what you need.
Don’t buy it if your plan is strictly exposed cabling, or if you’re working on a distance that clearly exceeds the included 50-foot spool and splicing won’t be acceptable in your setup. And keep in mind that while the base description frames it for residential class in-wall use, you’ll still want to confirm it aligns with your code and building requirements.
Quick FAQ
Is this wire meant for in-wall speaker installs?
It’s described as CL2 rated for use within the walls of residential class buildings, so it’s intended for that kind of installation.
How long is the spool?
The listing description states 50 continuous feet.
What conductor type is it?
It’s described as oxygen-free pure bare copper conductors at 99.95% purity.
Does it help with wiring polarity?
Yes—each conductor has its own color-coded jacket inside the white CL2-rated outer jacket, which is meant to make termination easier.
What should I double-check before running it through a wall?
Check that CL2 rated in-wall use matches your local code and the specific installation conditions for your project, and verify the run length fits within the 50 feet you’re buying.