Milescraft Drill Guide 1307

When a handheld drill wanders off square, even a small hole can end up visibly crooked. The Milescraft 1307 Drill Block PRO gives the bit a physical guide, with built-in centering guides to help line up the starting point and a range of openings for different bit sizes.

Its all-metal, hardened-steel construction and V-grooves also make it more versatile than a basic guide intended only for flat stock. It still depends on careful setup and a securely held workpiece.

Technical details

The block has 25 drill guides, covering 1/8" to 1/2" in 1/64" increments. That range gives you more size choices than a guide with only a few fixed openings, which can be useful when a project calls for a particular bit rather than the nearest common size. Built-in centering guides help position the tool, while the dual V-groove design is intended for round stock and corners.

The body is described as 100% hardened steel. That makes this a straightforward, all-metal tool rather than a guide built around a plastic body. The listing does not specify dimensions, weight, or a clamping mechanism, so those details are worth keeping in mind if storage space or hands-free use matters to your setup.

Getting the most from it

This is a drilling guide, not a power tool: you supply the drill and bit. It can help when you need a straight hole with a handheld drill and would rather not rely on sighting the angle alone. Compared with a more demanding setup such as a drill press, it is a portable, manual approach, it does not turn the job into a fully supported machine operation.

The centering guides are there to help with alignment, but a steady start still matters. From the way it is set up, the V-grooves provide a way to seat round stock or position the block against a corner. They do not replace securing the workpiece. If a piece can roll or shift, hold it safely in place before drilling.

Usage tips

Choose the guide that matches your bit, then center the block over the intended drilling point before starting. For example, when making a hole in a piece of round stock, the V-groove can help the block sit against the curved surface while you align the bit. Keep the stock secured, start slowly enough to maintain your position, and let the guide support the angle rather than forcing the drill.

For corner work, seat the block against the corner and check that it is stable before drilling. A handheld guide can be convenient for occasional shop tasks or work where a drill press is not the practical choice, but it still calls for a controlled grip and a stable workpiece.

Before you decide

What bit sizes does the block cover? It includes 25 guides from 1/8" through 1/2", in 1/64" increments.

Can it be used with round stock? The dual V-groove design is made to accommodate round stock as well as corners.

Does it help with alignment? Built-in centering guides are included to help line up the block before drilling.

Final verdict

It makes sense if you use a handheld drill and want a metal guide with a broad range of bit openings, especially for occasional straight-hole work on flat pieces, round stock, or near corners. It might not be a great match if you need a drill-press setup, hands-free clamping, or details such as exact dimensions and weight before choosing, those features are not specified here. The main tradeoff is simple: it offers a portable way to guide a drill, but the user still has to align and secure the work.