LOVIGA DryerHoseKit-4inL 4-Inch Dryer Vent Kit with 90-Degree Elbow

For a laundry setup where the dryer sits close to the wall, this 4-inch LOVIGA vent connector kit brings the hose, elbow, and wall plate together in one installation. Its 90-degree turn helps route the vent in a tight space.

If your priority is keeping the dryer area neat while protecting the hose from being crushed or cracked, the compact elbow offers a practical alternative to a straight connection. The wall plate is designed to connect with 4-inch wall ducting.

The kit also includes sealing components and hose clamps for the connections. That makes it a useful choice for a dryer vent update where you want the main connector pieces and installation hardware together.

What to know

The 90-degree elbow and wall plate are made from ABS, described as heat- and tear-resistant and easy to clean. The angled connector helps guide the hose behind the dryer while taking up less space than a straight route. It is intended to help prevent the hose from being crushed or cracked when the appliance is positioned close to the wall.

For connection and sealing, the kit includes a dryer vent hose, wall plate, two silicone sealing rings, two couplers, sealing tape, two hose clamps, and a pack of screws, along with the 90-degree elbow. The adjustable clamps secure the hose connections, while the rings and tape are intended to help seal them. The wall plate is sized for 4-inch ducting, so this kit is suited to a setup using that duct size.

Quick sizing guide

Start with the wall duct: this kit uses a 4-inch wall plate. Match that size to your existing vent connection, then consider whether a 90-degree turn will help route the hose behind the dryer. The elbow is especially relevant when a straight hose path would press against the wall or take up more room. The listed product dimensions are 5 x 5 x 4 inches.

Best use cases

This connector kit is designed for dryer vent arrangements where space behind the appliance is limited and a neat hose route matters. For example, when placing a dryer near a wall, the elbow can turn the connection while helping keep the hose from being pinched. The wall plate and included sealing pieces support the connection at the duct, and the clamps secure the hose at its connection points.

It is also described for bathroom ventilation and laundry rooms. If your priority is a compact dryer connection, the angled elbow and wall plate address that need, if you are replacing only a section of hose in a more open setup, a hose-only approach may be more direct. Choose this kit when the elbow, wall connection, and sealing hardware are useful parts of the same job.

Questions before you buy

What duct size is the wall plate made for? The wall plate is designed for 4-inch dryer vent ducting. Match it with a 4-inch wall connection for the intended fit.

What comes in the kit? It includes a 90-degree dryer vent elbow, vent hose, wall plate, two silicone sealing rings, two couplers, sealing tape, two hose clamps, and a pack of screws.

What material are the elbow and wall plate? Both are made from ABS. The material is described as heat- and tear-resistant and easy to clean.

Buying verdict

For a dryer installed close to the wall, the LOVIGA kit combines a space-saving 90-degree elbow with a 4-inch wall plate, hose, clamps, and sealing components. It brings the key parts for a compact vent connection into one kit, making it a practical fit for laundry setups that need a more orderly hose route.