LET'S RESIN ALR00140 Epoxy Resin Kit, 64 oz, 1:1 Clear Casting Formula

The 64-ounce LET'S RESIN epoxy kit pairs clear resin with hardener for casting and coating craft projects. Its two-part format gives you a defined 1:1 mixing ratio by volume for preparing a batch.

Use it for projects such as jewelry, coasters, and mold casting. The formula includes anti-foaming agents intended to help bubbles disappear as the resin settles. Looking for a clear finish without a lengthy bubble-removal process?

The kit is designed for beginners and experienced crafters alike. Follow the mixing directions and work in a well-ventilated space as you prepare a pour.

Size & fit

With 32 ounces of resin and 32 ounces of hardener, this 64-ounce kit is suited to craft sessions that call for more material than a small, single-project bottle. The two components are mixed in equal volumes, so measure each part carefully before combining them. For a first project or a new technique, the manufacturer recommends reading the instructions and testing a small amount first.

The resin can be used for casting or coating, including projects such as jewelry and coasters. For a practical workflow, measure the two parts, mix slowly for at least three minutes, then pour into your mold or apply to the craft surface. The stated working time is 40 minutes, offering a window to prepare and place the mixed resin. The suggested curing temperature is 75–85°F.

Pros

The clear formula and anti-foaming agents make this kit a fit for pieces where visibility and a clean-looking finish matter. The manufacturer says bubbles will disappear within an hour, helping simplify the finishing process for castings and coatings. Once cured, the resin is described as resistant to scratches and water, with heat resistance up to 160°F.

Buyer feedback often highlights the clarity of finished pieces and ease of mixing and working with the resin. Some also describe it as useful for mold work. Experiences with curing time and durability are mixed, so carefully following the ratio and mixing instructions is important to getting the intended cure.

Key specifications

• Type: Two-part epoxy casting and coating resin
• Format: 32 oz resin and 32 oz hardener
• Capacity: 64 oz total
• Mixing ratio: 1:1 by volume
• Material: Epoxy resin
• Color: Translucent
• Dimensions: 7.6 x 5 x 5 inches
• Working time: 40 minutes
• Curing time: 8–24 hours
• Curing temperature: 75–85°F
• Heat resistance: Up to 160°F once cured

Final verdict

For makers preparing clear castings, jewelry, coasters, or other DIY art, LET'S RESIN ALR00140 offers a substantial two-part kit with a straightforward equal-volume ratio. Its bubble-reducing formula and stated cured resistance to water, scratches, and heat support a range of craft applications. Follow the instructions for mixing and curing, and this kit provides a practical format for projects where a clear epoxy finish is part of the design.