Craft Resin 2 Gallon Casting Resin Kit, Crystal Clear Self-Leveling Epoxy

Makers looking for a clear epoxy for art, wood, jewelry, coasters, or mold casting get a versatile two-part kit in a 2-gallon size. Its low-viscosity, self-leveling formula is designed for smooth, glossy finishes. Low odor makes it suitable for home studios and workshops.

Worth noting

The kit pairs epoxy resin with hardener and uses a simple 1:1 mixing ratio by volume. That makes it practical for projects that need more material than a small craft pour, from coating a tabletop to preparing several smaller pieces. The crystal-clear finish and UV-resistant formula suit work where appearance matters, while the self-leveling consistency helps spread resin across a surface or into a mold.

The set includes a manual, mixing stick, and gloves, so key items for preparing a pour are supplied together. Buyers often highlight ease of use and clear results, particularly for beginner projects. Feedback on bubbles and curing time is mixed, so careful measuring, mixing, and layer depth are important parts of the process.

Everyday use

Use this epoxy for casting in molds, making jewelry and coasters, creating art, or coating wood and tabletops. Its low viscosity supports casting and spreading, while the high-gloss finish gives finished pieces a glass-like look. For a larger project or a series of pours, the 2-gallon format offers more material in one kit than a small, single-project set.

The formula is described as heat resistant up to 203°F (95°C). Manufacturer guidance states that a project is hard to the touch in about 18 hours and fully cured in about 24 hours, heat and scratch resistance develop after 21 days. These timelines provide useful planning points when deciding when to handle a piece or put it into service.

Usage tips

Measure equal volumes of resin and hardener, then mix slowly and steadily for 3–5 minutes. Keep the workspace and materials at 70–75°F, and pour in layers no thicker than 1/4 inch. The product guidance recommends using a heat torch to address surface bubbles. Follow the included instructions for the specific project, especially when planning a deeper cast or a finished piece that will be used regularly.

A smooth, clear result starts with a measured mix and a controlled pour. For example, when making a set of coasters, prepare the resin and hardener at the same volume, pour into the molds in layers within the recommended depth, and allow the stated curing time before use.

What to clarify

What can this epoxy resin be used for? It is intended for art, wood coating, tabletop projects, jewelry, coasters, and mold casting.

What is the mixing ratio? Combine equal parts resin and hardener by volume. The instructions recommend mixing slowly and steadily for 3–5 minutes.

How long does curing take? Manufacturer guidance says the project should be hard to the touch in about 18 hours and fully cured in about 24 hours. Heat and scratch resistance develop after 21 days.

Buying verdict

This Craft Resin kit suits makers who want one clear, self-leveling epoxy for both casting and surface coating, with enough volume for larger work or multiple projects. The 1:1 mix, included manual, and broad use across art, wood, jewelry, coasters, and molds make it a practical fit for home studios and workshops.