LEKATO Wireless XLR Microphone System 5.8GHz

For a live vocal or spoken announcement, an XLR cable can be one more thing to manage across a stage. The LEKATO wireless XLR system replaces that run with a transmitter and receiver.

It is built around XLR microphones and offers four switchable channels. That makes it worth considering for rehearsals, church services, karaoke, and interviews where moving freely matters.

The main tradeoff is microphone compatibility: dynamic mics are the intended match, while some condenser mics may introduce noise depending on their power needs and setup.

Technical details

The system uses the 5.8GHz ISM band and supports frequency hopping. LEKATO lists four switchable channels and says up to four sets can operate at once without crosstalk. Its stated wireless range is up to 100 feet, and latency is under 5ms, details that may matter when vocals need to stay in sync with a live performance or video.

Audio specifications include 24-bit/48kHz uncompressed transmission, a 20Hz–20kHz frequency response, and a 106dB dynamic range. The rechargeable battery is rated for up to five hours of continuous use. A two-in-one USB-C cable charges the transmitter and receiver together, and a power indicator helps you keep track of them. These are listed specifications, not a substitute for checking how the system behaves with your particular microphone and audio setup.

Requirements

The primary fit is an XLR dynamic microphone. The maker also describes compatibility with select condenser microphones requiring 24V phantom power or less, but notes that some condenser models may produce noise due to power draw, shielding, or wireless interference. For a lower-risk setup, pair it with a dynamic mic rather than assuming every condenser will work cleanly.

The receiver is intended for a mixer’s XLR connection or a non-mixer LINE IN input, depending on your setup. Standard XLR connectors are designed for plug-and-play use, with no software or driver installation. If your microphone or input relies on a particular power arrangement, check that before replacing a wired connection.

Usage tips

For rehearsal, connect the transmitter to the mic and the receiver to the audio input, then check the signal before people arrive. That quick sound check can reveal a noisy condenser or a connection mismatch before it becomes a problem during a service or performance. Keep the charging cable accessible, too, the stated runtime is up to five hours, not an unlimited run time.

Compared with a basic wired XLR setup, this system trades the physical cable for rechargeable components and a wireless link. That can make walking between a mic stand and the front of a room less awkward, while a wired mic remains the simpler choice if you want to avoid charging and wireless variables. It suits you if you want to move around and use a dynamic XLR mic. It might not be a great match if your setup depends on a condenser whose power or noise behavior is uncertain.

Questions before you buy

Can it work with a condenser microphone? The maker says select condenser models requiring 24V phantom power or less may be compatible. Noise can still depend on the specific mic and setup.

Can multiple systems run at the same time? The system has four switchable channels, and the maker says up to four sets can operate simultaneously.

How is it charged? The transmitter and receiver use rechargeable batteries, and the included two-in-one USB-C cable can charge both at once.

Is it worth it?

This LEKATO system is most compelling when removing the cable would make a real difference to a vocal, speech, or rehearsal setup, especially with a dynamic XLR mic. The four channels and stated range give you useful flexibility, but the five-hour maximum runtime and qualified condenser compatibility are meaningful constraints. Choose it for added movement with a suitable mic, stick with a wired connection if dependable simplicity matters more than getting rid of the cable.