KYX Boat Trailer Jack 1500 lbs with 8-Inch Wheel and 10.6" Lift
Product description
What it is
The KYX Boat Trailer Jack is a heavy-duty tongue jack designed to lift and stabilize trailers up to 1500 lbs. With a 10.6" vertical lift and an 8-inch polymer wheel, it targets boat, RV, horse, and utility trailers, offering a straightforward path to safer hitching, leveling, and maintenance on the water or on the road.
How it helps your trailer setup

On the practical side, this jack gives you extra ground clearance and a firm stance when you’re docking, launching, or storing your trailer. The 8" wheel is built to resist sinking in mud, sand, or gravel, helping you move the trailer across uneven surfaces without getting stuck. Its marine-grade, corrosion-resistant steel construction is meant to stand up to coastal environments and outdoor use, so you’ll get longer life out of it without frequent replacements.
Design and installation notes
The swivel tongue design lets the jack fold parallel to the trailer, freeing up space for clearance and travel. Installation supports both bolt-on and welded setups, with all necessary hardware included to speed up setup. That means you can choose the mounting method that best fits your trailer and workflow.



What stands out (pros) and where it may fall short (cons)
Pros: solid lifting capacity for common small to mid-size trailers, reliable wheel for rough surfaces, corrosion resistance helps in marine settings, easy folding for clearance, hardware included for quick install. Cons: the maximum load is 1500 lbs, so it’s best suited for trailers within that range and may not be ideal for heavier setups, actual durability and performance depend on proper installation and regular maintenance.
Who it’s for

If you own a boat, RV, horse, or utility trailer in coastal or wet environments, and you need a stable, easy-to-move jack that won’t buried in soft ground, this model fits the bill. It’s worth considering if you value a long lift for tweaking height on uneven surfaces and you want a marine-grade build rather than a budget option.
When it makes sense to buy
Choose this jack when you need a dedicated, heavy-duty lift for frequent hitching, leveling, or stabilizing on trailers up to 1500 lbs. It’s a sensible upgrade if your current jack struggles on gravel or mud or if you want a marine-grade option that resists corrosion.



When to pass
If your trailer regularly exceeds 1500 lbs, or you require advanced features like electric actuation or higher travel than 10.6", this model may not meet those needs. Also, if you seldom encounter soft ground and don’t need a wide, offshore-ready jack, a lighter option might suffice.
What to check before buying

Confirm that your trailer’s tongue width and mounting points accommodate a bolt-on or welded installation. Verify that the 10.6" lift provides the height you need for your typical docking or loading scenarios. Consider the environment you’ll be using it in, if you’re near saltwater, the marine-grade coating will be a meaningful durability factor.
Practical use example
Imagine pulling up to a marina slip, you back your trailer, and with a quick fold of the tongue jack, you gain enough height to align the coupler. A firm, cross-checked stance on a muddy ramp means you can hitch or unhitch without fighting wheel sink or misalignment, then roll the trailer smoothly across uneven ground to park.



What this implies vs. other approaches
This jack targets a balance between rugged on-site lifting and ease of motion on varied terrain. Compared to ultra-light jacks, you get a higher weight rating and a heavier wheel, which helps avoid getting stuck. It’s not a high-end motorized jack, but for manual cranking and occasional marine use, it provides predictable performance without complexity.
Final decision
Final verdict
Is it worth it? If your trailer fits within the 1500 lb range and you need a reliable, corrosion-resistant jack with good mobility on soft ground, this KYX model offers practical value for routine maintenance and lifting tasks. It’s especially sensible for coastal or outdoor use where a sturdy, long-lasting jack matters more than flashy features. Consider your load requirements and clearance needs to decide if this is the right upgrade for your setup.
FAQ
- How easy is installation? It includes hardware and supports both bolt-on and welded mounting, designed to simplify setup.
- Will it handle salty marine environments? Yes, it uses a corrosion-resistant marine-grade build intended for long outdoor use.
- What’s the practical lift height? It provides a 10.6" vertical lift, which should cover typical trailer hitching and leveling scenarios.
Products with discounts that might interest you
- METOWARE Adjustable Trailer Hitch 18,000 lbs 🚚
- VEVOR Trailer Jack Block 6000 lbs RV leveling blocks 🛻
- TYT 18" Trailer Hitch Extension for 2-Inch Receivers (2-Pack 5/8" Pins) – 3500 lbs GTW / 350 lbs TW
- POLESTAR 7500 lbs Electric Trailer Jack with LED Light and Waterproof Cover
- Mofeez Travel Trailer RV Cover 24'-27
- POLESTAR Electric Trailer Jack 3500 lbs 🚚
- Orion Motor Tech Trailer Hitch Ball Mount for 2" Receiver
- Aircraft Aluminum Adjustable Trailer Hitch for 2-Inch Receiver — 6" Drop/Rise, Dual Ball (2" and 2-5/16"), 12,500 LBS Capacity
- Autofonder Heavy Duty Axle Tie Down 114" 🚛
- VEVOR 5000 lbs A-Frame Trailer Jack 15" 🛻
- CAMMOO Adjustable Trailer Hitch ML-2060: 6-In Rise/Drop, 2" and 2-5/16" Balls, 20,000 LBS GTW
- POLESTAR Electric Trailer Jack 5000 lbs 🚚
- BIG RED ATR39003R Weld-On Pipe-Mount Swivel Trailer Jack, 2,000 lb
- Umbrauto Pop Up Folding Camper Cover 12'–14' 🛻
- Geteen GT25053B Adjustable Trailer Hitch Ball Mount (Fits 2.5" Receiver, Tri-Ball, 15,000 GTW)
- TYT Adjustable Tri-Ball Trailer Hitch 2-Inch Receiver
- Autofonder Car Hauler Straps Heavy Duty 10,000 lbs – 3-Point Tire Tie Down Straps for Trailers (Over The Wheel with Rubber Cleats)
- Nilight Straight Trailer Coupler with Safety Latch & Chain for 1-7/8 Inch Hitch Ball (2-1/2 Inch Channel, 2000 LBS)
- Nilight JK-61A 2-Inch Rear Hitch for Jeep JK
- CAMPX Adjustable Trailer Hitch for 2.5-inch Receivers (6" Drop/Rise) with Dual 2" and 2-5/16" Solid Balls
- Curt A-Frame Coupler 25210

