POLESTAR Electric Trailer Jack 3500 lbs 🚚
Reviews
Price
Product description
This electric A-frame tongue jack by POLESTAR speeds hookup and leveling for travel trailers and campers, combining a 3,500 lb lifting capacity with a 9 to 27 inch lift range to simplify hitching and ground clearance adjustments. It includes a removable crank for manual use and an integrated LED that lights the ball and coupler during nighttime operations.
Key Points

The unit mounts to an A-frame and is driven by a 12V DC motor that, according to the manufacturer, delivers high torque to raise and lower the trailer faster than hand cranking. A built-in circuit breaker automatically trips and resets if current draw becomes excessive, offering an extra layer of protection for the electrical system. The hard wiring option allows direct connection to the trailer battery for convenient operation.


Technical Specifications

- Name: POLESTAR Electric Trailer Jack 3500lbs
- Lift capacity: 3500 lbs
- Retracted length: 9 in
- Extended length: 27 in (plus a 4.5 in drop leg)
- Outer tube diameter: 2.25 in
- Motor: 12 V DC
- Warranty: 1 year
Usage Recommendations



Install the jack on a clean A-frame mounting area and follow the manufacturer’s wiring instructions for a secure hard-wired connection. Keep the removable emergency crank accessible in case the battery is depleted or electrical faults occur, since manual operation remains possible. The waterproof cover protects internal components, but consider periodic checks of seals and fasteners to maintain corrosion resistance in marine or coastal environments. ⚙️
Advantages

The built-in LED improves visibility around the coupler when hitching at night, making alignment easier without external lamps. The automatic circuit breaker reduces the chance of motor damage under heavy load, and the removable hand crank gives a reliable fallback. The compact 2.25 inch tube diameter and standard lift range suit most small to mid-size travel trailers and RVs. ⚡
Practical Tips
For best performance, verify that the trailer battery is fully charged before repeated long lifts, as heavy use will increase amperage draw. The unit may not be the best option for very heavy fifth-wheel setups since its 3,500 lb rating is intended for A-frame trailers, according to the manufacturer. Lubricate moving parts occasionally and keep the LED lens clean for maximum light output. 🔧
Products with discounts that might interest you
- VEVOR Trailer Jack Block 6000 lbs RV leveling blocks 🛻
- Mofeez Travel Trailer RV Cover 24'-27
- POLESTAR Electric Trailer Jack 5000 lbs 🚚
- Umbrauto Pop Up Folding Camper Cover 12'–14' 🛻
- METOWARE Adjustable Trailer Hitch 18,000 lbs 🚚
- TYT 18" Trailer Hitch Extension for 2-Inch Receivers (2-Pack 5/8" Pins) – 3500 lbs GTW / 350 lbs TW
- POLESTAR 7500 lbs Electric Trailer Jack with LED Light and Waterproof Cover
- Orion Motor Tech Trailer Hitch Ball Mount for 2" Receiver
- Aircraft Aluminum Adjustable Trailer Hitch for 2-Inch Receiver — 6" Drop/Rise, Dual Ball (2" and 2-5/16"), 12,500 LBS Capacity
- Autofonder Heavy Duty Axle Tie Down 114" 🚛
- VEVOR 5000 lbs A-Frame Trailer Jack 15" 🛻
- CAMMOO Adjustable Trailer Hitch ML-2060: 6-In Rise/Drop, 2" and 2-5/16" Balls, 20,000 LBS GTW
- BIG RED ATR39003R Weld-On Pipe-Mount Swivel Trailer Jack, 2,000 lb
- Geteen GT25053B Adjustable Trailer Hitch Ball Mount (Fits 2.5" Receiver, Tri-Ball, 15,000 GTW)
- TYT Adjustable Tri-Ball Trailer Hitch 2-Inch Receiver
- Autofonder Car Hauler Straps Heavy Duty 10,000 lbs – 3-Point Tire Tie Down Straps for Trailers (Over The Wheel with Rubber Cleats)
- Nilight Straight Trailer Coupler with Safety Latch & Chain for 1-7/8 Inch Hitch Ball (2-1/2 Inch Channel, 2000 LBS)
- Nilight JK-61A 2-Inch Rear Hitch for Jeep JK
- CAMPX Adjustable Trailer Hitch for 2.5-inch Receivers (6" Drop/Rise) with Dual 2" and 2-5/16" Solid Balls
- Curt A-Frame Coupler 25210



