KURUI 140-Piece #8 Self-Drilling Drywall Anchor Kit with Flat-Head Screws
Product description
The 140-piece format gives you a set of self-drilling drywall anchors and flat-head screws for wall-hanging projects. KURUI lists the kit for picture frames, wall decor, and curtain rods, with a stated holding capacity of up to 75 lb.
The anchors are designed to screw directly into drywall, so the listed installation approach does not require a predrilled hole. The screws use a Phillips drive, a flat head, and #8-32 threads.
This kit is intended for medium-duty hanging tasks rather than serving as a universal fastener for every wall or load. The product information does not specify conditions for the 75 lb rating, so match the hardware to the item and wall you plan to use it on.
Tech summary
- Type: Self-drilling drywall anchors and screws
- Fastener size: No. 8
- Thread size: #8-32
- Screw head: Flat
- Drive system: Phillips
- Set size: 140 pieces
- Screws included: 70 galvanized Phillips screws
- Listed holding capacity: Up to 75 lb
The stated capacity is useful as a reference, but the listing does not explain how it varies by wall condition, installation, or number of anchors. Avoid treating it as a guaranteed capacity for every hanging setup. Buyer feedback is mixed: some appreciate the assortment and report a secure hold, while others describe breakage during installation or difficulty getting the anchors to screw into drywall. That variation makes careful installation and choosing hardware for the specific load important.
How to use it
The anchors are intended to be driven into drywall with a screwdriver or screw gun, then secured with the included screw. For a typical project, such as mounting a picture frame or curtain rod, place the anchor where the fastener is needed and drive it slowly until it sits flush with the wall. The manufacturer cautions that overtightening can make an anchor spin, so stop once it is seated rather than forcing it farther.
If an anchor is difficult to start in a solid or thickly coated wall, the manufacturer suggests lightly tapping part of it into the wall with a hammer before turning it. This is an installation tip, not a promise that the anchors suit every wall material. The product is described for drywall, check that your wall and the item being mounted are appropriate for this type of fastener.
Box contents
The set is described as containing 70 galvanized Phillips screws. It is sold as a 140-piece kit, but the supplied details do not give a separate anchor count, so do not assume a particular screw-to-anchor breakdown from the total alone. Check the package contents before starting a project, especially if you need a specific number of complete fastener pairs.
Before you decide
Why might an anchor spin while being installed? The manufacturer attributes this to overtightening and recommends driving it slowly until flush. What if it is hard to start? For solid or thickly coated walls, the guidance is to tap the anchor lightly into the wall before screwing it in. Are these suitable for every hanging job? The listing names picture frames, decor, and curtain rods, but does not provide load conditions for its 75 lb claim. Choose hardware based on the wall and the actual load, rather than relying on that figure alone.
Should you buy it?
It makes sense if you want a multi-piece kit for common drywall hanging jobs and prefer a screw-in anchor to nails or adhesive hanging strips. The Phillips screws and self-drilling design give it a straightforward role in a basic home project. Not the best choice if your project needs a confirmed capacity for a particular wall setup or a fastener specified for a demanding load, the stated limit lacks those details, and buyer reports on durability and installation are divided.