Torx Bolts M6

These M6 Torx bolts are aimed at people replacing a fastener or assembling equipment who already know the thread and drive their project requires.

The listing specifies a 1.0mm thread pitch, 45mm thread length, and T30 drive. That gives you useful details to compare with the fastener you’re replacing.

If you prioritize a star drive for tool access in a tight spot, these may suit your job, if you prefer a fastener chosen for a specified stainless-steel grade or a different drive, look for those details before deciding.

Getting the most from it

Match the bolt to the threaded hole and the space available around it. The stated M6 diameter and 1.0mm pitch matter as much as the 45mm thread length: a bolt that looks close can still be wrong for the existing thread or leave too little or too much length for the joint. The listing gives a total length of 49.5mm as well, so distinguish that figure from the thread length when comparing dimensions. If you can’t identify the thread pitch, don’t assume a visual match is enough, without that measurement, fit remains uncertain.

The T30 Torx drive is the practical detail to plan around. For example, when fastening a machine part against a nearby panel, a Torx bit can be easier to position than a socket or wrench where there isn’t room to swing or seat one. The listing describes the socket head as useful in restricted spaces and says the six-lobe groove is intended to help the tool engage during installation. Use the matching drive rather than treating the head as a generic star shape.

Why it’s worth it

The appeal here is specificity. Rather than buying assorted hardware and hoping one piece matches, you get a stated size, pitch, drive, and thread length to compare against a repair or assembly. The pack contains 20 bolts, which may be useful when a project calls for several matching fasteners or when you want replacements on hand.

The product is described as stainless steel with a smooth, burr-free surface, and the listing presents it for machine parts and clamping as well as household, electronic, lighting, and other equipment. Those are broad use categories, not a guarantee that every bolt is right for every material or environment. The stainless-steel grade is not specified, so this is a less informative choice if your application requires a particular grade or documented material properties.

You’ll appreciate it if you have a matching M6 threaded connection and need a T30 fastener for a compact installation. It’s not for you if the required length, thread, or material specification is unknown and you need a bolt selected to a stricter engineering requirement.

The essentials

• Drive: T30 Torx
• Thread: M6 diameter, 1.0mm pitch
• Thread length: 45mm
• Total length: 49.5mm
• Material: Stainless steel
• Pack size: 20 bolts

Before choosing, compare the dimensions with the original bolt or the project specification, including the available clearance and the amount of thread needed. The listing doesn’t provide a stainless-steel grade or additional load information, so don’t infer suitability for a demanding application from the material description alone.

Buying verdict

These bolts make sense when the job calls for the stated M6 x 1.0 thread, 45mm thread length, and T30 drive, particularly where access for a socket or wrench is limited. They offer a clearly described alternative to generic mixed hardware, but only if those measurements line up with your assembly. If you need a different length, a documented steel grade, or confirmed performance for a specific load or environment, this listing doesn’t provide enough information to settle that choice.