IYILO Level 2 EV Charger (40A/9.6kW) J1772 with Wi‑Fi, RFID & Dual Temp Sensors, NEMA 14-50P, ETL & Energy Star
Product description
The essentials
If you’re moving up from Level 1 to a proper home Level 2 setup, the IYILO Level 2 EV Charger is built around one big idea: charging that’s faster, but also paying attention to heat and electrical risk. On paper, it combines a J1772 connector with Wi‑Fi control, RFID-based access, and scheduled charging—plus dual temperature sensing aimed at reducing the “worried about overheated outlets” problem that comes with high-current charging.
It also supports the usual home charging priorities: set a preferred time window, track usage and cost in the app, and adjust the output current. It’s not the most minimal charger you can buy, and it does have a couple of practical limits (like 2.4GHz-only Wi‑Fi). But if you want smart control without getting into complicated installs or specialty hardware, it’s easy to see why people consider chargers like this for daily drivers.
What you’ll notice in everyday use
The headline spec is 40A / 9.6kW via a NEMA 14-50P connection, with current adjustable from 6A to 40A in 1A increments. That flexibility matters more than it sounds: you can dial charging down if your setup needs it, then move up when conditions are right.

The other thing you’ll notice—if you’re the kind of owner who checks details—is the dual temperature sensing. The charger uses advanced NTC temperature sensors in both the NEMA 14-50 plug and the J1772 connector. The system monitors temperatures in real time and shows data in the app. If overheating is detected, it can automatically reduce current or even stop charging. It’s one of those “peace of mind” features that can make a difference over the long run, especially compared with simpler chargers.
For speed expectations, the description states it can deliver up to 38 miles of range per hour at 40A (9.6kW). Again, real-world mileage can vary by vehicle and conditions, but as a target, it gives you a clear sense of what this charger is aiming for.
Key points on smart charging and access
This charger leans into convenience. The IYILO App supports Time-of-Use (TOU) rate settings, energy usage/cost tracking, and managing multiple user accounts. Charging modes mentioned include scheduled charging, RFID card charging, and plug-and-charge.
There’s also the ability to get remote upgrades (OTA) to support performance improvements and a longer lifespan. That’s not something you always think about when shopping, but it’s useful if you want your charger to age more gracefully.



One limitation to keep in mind: the product notes that it supports 2.4GHz Wi‑Fi only, not 5GHz. If your home network is 5GHz-only or you don’t have a 2.4GHz option available, that’s a real purchase blocker.
Safety, certifications, and weather resistance
IYILO positions this charger as safety-forward. The description says it’s UL compliant and passed UL2231 and UL2594 tests. It’s also ETL and Energy Star certified.
It includes built-in CCID 20 leakage protection, plus multiple electrical protections such as over-current, over-voltage, and short-circuit protection. The listing also claims a total of nine safety features.
For outdoor mounting considerations, it’s rated NEMA 4 waterproof. That’s the kind of rating that can matter if the charger will be exposed to rain, snow, or wet conditions.

Tech specs (at a glance)
- Type: Level 2 EV charger with J1772 connector
- Output/Amps: up to 40A
- Power: 9.6kW
- Cable length: 25ft
- Connection: NEMA 14-50P (240V)
- Connector format: SAE J1772
- Wi‑Fi: 2.4GHz only (5GHz not supported)
- Certification: ETL and Energy Star
- Waterproof rating: NEMA 4
- Protections: CCID 20 leakage protection, over-current/over-voltage/short-circuit mentioned
Compatibility and the one catch with Tesla
It’s designed to work with “virtually all” J1772 EVs and PHEVs in North America, using the standard SAE J1772 connector.
For Tesla vehicles, the listing says compatibility is via the NACS adapter, and the adapter is not included. That means you’ll want to check whether you already have the right adapter on hand before planning to use the charger for a Tesla.



Installation, setup, and what to double-check
The listing emphasizes easy installation and includes an installation guide, with step-by-step videos or PDF manuals available via the app. That’s helpful for first-time buyers.
Still, before you commit, it’s worth verifying a couple of practical points:
First, confirm you actually have a compatible NEMA 14-50 outlet available for a 240V Level 2 setup.
Second, make sure your Wi‑Fi environment supports 2.4GHz. If it doesn’t, you may end up troubleshooting before you even get to scheduled charging.

Third, consider whether you want the app features. If you’re the type who prefers to keep things fully manual, you may not use RFID, TOU scheduling, cost tracking, or remote upgrades—though the charger still has the core charging function.
Is it worth it?
It’s worth buying the IYILO Level 2 EV Charger if you want Level 2 charging speed with adjustable output, smart scheduling, and a stronger focus on temperature safety through dual sensors in the plug and connector. The app-based heat monitoring and automatic current reduction/stopping can be a meaningful advantage if you’re charging regularly and want extra protection.
You may want to skip it if you can’t provide 2.4GHz Wi‑Fi for setup, or if you need Tesla charging without buying the separate NACS adapter. It also may not be the best fit if you’re looking for a super-simplified charger with no reliance on app features.
For most buyers, this sits in the “serious home charging” category—more capable than basic Level 2 options, while still straightforward to use day to day.



Quick FAQ
Does it support scheduled charging?
Yes. The listing says the app supports scheduled charging, along with TOU rate settings and energy/cost tracking.
Is the Wi‑Fi 2.4GHz or 5GHz?
It supports 2.4GHz Wi‑Fi only. 5GHz is not supported.
How does RFID charging work?
The charger supports RFID card charging as one of its modes, alongside scheduled charging and plug-and-charge.
What about safety and overheating?
It uses dual temperature sensors in both the NEMA 14-50 plug and the J1772 connector. The system monitors temperatures in real time and can reduce current or stop charging if overheating is detected.
Is it weatherproof?
It’s rated NEMA 4 waterproof, which is intended for outdoor wet-condition use.
Products with discounts that might interest you
- Marsauto H10 LED Fog Light Bulbs
- FOXWELL NT604 Elite car scanner OBD2
- Nilight 10013W NI-WA07 LED Light Bar Wiring Harness Kit with 5-Pin Rocker Switch (12V)
- FTEVAR 9005/9006 LED Fog Light Bulbs Combo (Fanless, Plug-and-Play), Pack of 4
- OBDMATE OM901 OBD2 Scanner 3.5
- Jemluse Wireless CarPlay Adapter for iPhone
- Carista EVO Bluetooth OBD2 Scanner: DIY Car Diagnostics with Optional Advanced Features
- KZYEE KT60 Digital Timing Light with RPM 12V
- AUXITO H3 LED Bulb Review: 16,000LM, 10-Year Life, Plug‑N‑Play Pack of 2
- LASFIT L2-1156 LED Backup Bulbs, 6000K White, Projector Lens, 2-Pack
- XTOOL D7S 3-Year Update OBD2 Scanner
- LAUNCH CRP129HD Heavy Duty Truck Scanner for Diesel Diagnostics, DPF Regen, and Speed Limit Adjust Reset
- LISEN 90W USB-C Car Charger for iPhone & Android with 30W USB-C Cable (Spiral Cord)
- Loncaster Car Phone Holder silicone anti-slip pad
- Marsauto 194 LED Bulb 10-pack
- MOTOPOWER MP69033 OBD2 Code Reader for Cars
- Renogy 400W Solar Blanket, 25% Efficient ⚡
- SEALIGHT 3157 LED Turn Signal Bulb 600% brighter
- VI9000 Fat Whip Lights 0.5ft Dual Pack 🌟
- TOPIK LED Headlight Bulbs H11
- Launch OBD2 scanner CRP123X Plus
- LUXSTER HolyKnight 9007 HB5 50000lm LED 55W
- SEALIGHT S7S 9005/9006 Fog Light (4-Pack): 150,000 LM, 6500K Cool White with Efficient Cooling
- DDPAI Z60 4K Dash Cam Front & Rear with 32GB eMMC, 64GB Card Included, 5GHz WiFi, GPS, and AI Night Vision

