iGreely 2/0 AWG Battery Cable with 3/8" Lug — Heavy Duty Copper Wiring for Solar, Automotive, Marine
Product description
What it is
This is a 2/0 AWG copper battery cable kit featuring 3/8" ring terminals on both ends. It’s built with 2147 strands of 0.2mm AS copper and a flexible EPDM insulation jacket designed to withstand automotive, marine, and outdoor use.
What matters most

On paper, this cable aims to balance flexibility with durability. The closed-end lug design helps protect conductors from moisture, solvents, and outdoor exposure, while the option to crimp or solder the lugs provides installation flexibility. If you prioritize a robust, long-lasting connection in harsh environments, the copper construction and abrasion-resistant jacket are key advantages.
Technical snapshot (brief)


The cable uses 2147 strands of 0.2mm copper with a 3/8" heavy-duty lug at each end. EPDM insulation is noted for abrasion resistance, waterproofing, flame retardance, and heat insulation. The product mentions compatibility with heat shrink configurations and suitability for distribution boxes, solar setups, marine, and general outdoor wiring.

The best use cases
This cable is well-suited for solar inverters, automotive battery banks, RVs, marine boats, and DIY electrical wiring projects where a flexible, proven copper lead is needed. If your setup requires a strong connection that resists moisture and solvents, this kit offers a straightforward, all-in-one sourcing option.
What to watch out for

No voltage or insulation thickness figures are stated in the brief, so if your project has strict electrical specs or long-run requirements, you’ll want to confirm those details from the provided cable specification chart. Also, early buyers note that while the lugs are crimp-ready, some installers prefer soldering for maximum conductivity and vibration resistance.


Who it’s for
It’s a practical pick for DIYers, hobbyists, and professionals who want a single purchase for multiple wire gauges (2/0, 1/0, 2, 4, 6, 8 AWG) in one listing. If you’re replacing worn battery leads in a solar or marine system and need a robust, flexible copper cable with pre-crimped lugs, this kit can save time.

Who it may not be ideal for
If your project requires specialized insulation types, ultra-high voltage specs, or exact conductor counts/diameters beyond what’s stated, this product may not cover those niche needs. Also, if you prefer pre-insulated lugs with additional protective layers or a specific thermal rating, verify compatibility before purchase.
Before you buy – quick checks



- Inspect the included chart for strand count, insulation thickness, and copper gauge details.
- Decide whether you’ll crimp or solder the lugs based on your application and vibration exposure.
- Confirm that 3/8" lug size matches your battery terminals or distribution blocks.
Practical use example
Imagine setting up a solar inverter in a small off-grid cabin. You’d route the 2/0 AWG battery cable from the battery bank to the inverter, using the heavy-duty lugs for a tight, weather-resistant connection. The flexible EPDM jacket helps when routing around tight bends under a boat console or vehicle hood, reducing the risk of insulation wear over time.

Is it worth it?
Buying this kit makes sense if you want a single, versatile copper battery cable solution with pre-crimped lugs ready for crimping or soldering. It provides a straightforward option for projects that require a robust, flexible lead in 2/0 AWG and related gauges, especially in solar, automotive, or marine environments. It may not be the best choice if you need detailed electrical ratings or ultra-specific specs not listed in the chart.
FAQ (based on available data)
- Q: Can I solder the lugs? A: Yes, the lugs are described as compatible with crimping or soldering.
- Q: Is the insulation flame retardant? A: The jacket is described as flame retardant and heat-insulating.
- Q: What environments is it suitable for? A: Automotive, marine, RV, and solar outdoor applications are highlighted.
Products with discounts that might interest you
- BougeRV Solar Panel Mounting Brackets, Aluminum Alloy
- Dimyfiny 12V15AH LiFePO4 Ride-On Battery, 15Ah with 20A BMS & 2A Charger
- OBDAFM AFM/DFM Disabler for GM V6 and V8 Engines, Plug-and-Play
- DOKIO 100W Solar Panel, 2-Piece
- Geosiry 6 Gauge Battery Cable 15FT Pair 🔌
- dumfume 12.8V 100AH Group 31 LiFePO4 Battery, 100A BMS, 1280Wh
- 50 Cal Badass Bullet Antenna 2014+
- Dyness 24V 100Ah LiFePO4 Deep-Cycle Battery with 100A BMS
- GEARGO 2026 RV Surge Protector 30A with 15000J, IP68 Full-Coverage Auto Shutoff
- EGK 24V Charger for Ride-On Toys with 6.6Ft Cable (2.1mm x 5.5mm) — Compact Power Adapter
- Gidrox 12V RV Water Pump (4.0 GPM, 45 PSI) Quiet Diaphragm Pump w/ Pressure Switch
- Eoppen 304-Piece Car Fuse Kit with Puller, Tester, and Three Blade Fuse Styles
- EPLCSE DF 50-Amp RV Surge Protector, 12,000 Joules with Circuit Analyzer
- EVDANCE EV-AC05002T NACS Extension Cord, 21 ft, 50A, 240V
- FGJQEFG 7-Inch Slim Electric Radiator Fan Set, 12V 80W, Reversible Push-Pull
- GEARGO 30AMP-LED-UPGRADED 30-Amp RV Surge Protector, 16,000J, IP68
- Geosiry 2/0-3/8-3FT Battery Cable, 3 ft, 3/8-Inch Tinned Copper Lugs
- GOOLOO GP2000 12V Jump Starter, 2,000A, USB Outputs and LED Light
- BDFHYK Air Tank, 4.0 Gallon
- Autoexact Ignition Coil Packs FD504
- Anodized Black Carbon Fiber 50 Cal Bullet Antenna for Chevy Silverado & GMC Sierra (1999-2026) – Billet Aluminum Short Replacement
- EcoAuto 50 Cal Bullet Antenna for Ford F150
- EVDANCE Level 1&2 EV Charger 25FT Cable
- Deluwire 8 FT 7 Pin Trailer Plug: Heavy-Duty Wiring Harness for Trailers, RVs, and Campers

