HYPER GO 14301 V3 1/14 RTR Brushless RC Drift Car 38 mph

This 1/14 scale brushless RC drift car brings high-speed thrills and tunable handling for hobbyists and adult drivers looking to enjoy both drifting and all-terrain bashing. It combines a brushless Hobby 2845 3900KV motor with selectable tires and a built-in gyro, offering controlled slides on pavement and traction on dirt at speeds measured up to 38 mph according to the manufacturer.

Key Points

The model arrives RTR ready to run with a 2S 7.4V 2000 mAh rechargeable battery included and a separate receiver and 45A ESC for upgrade potential. The integrated gyro helps stabilize high-speed runs and makes corner corrections easier, recommended around 75% for balanced drift control. It includes three tire sets so you can switch from high-grip rubber for tarmac, rally tires for loose surfaces, or bald drift tires for controlled slides.

The chassis construction emphasizes durability with a 6061 aluminum alloy main plate, large metal support rods and an oversized foam front bumper for impact protection. Metal gears, a metal differential, and 5.5 mm diameter axles with M4 nuts deliver robust power transfer across the 4WD system. Cooling is addressed through a metal heatsink and dual cooling fans on the motor.

Technical Specifications

• Name: HYPER GO 14301 V3
• Motor: Hobby 2845 3900KV brushless, 4-pole, high torque
• ESC: 45A (supports 2S/3S according to manufacturer)
• Battery: 2S 7.4V 2000 mAh included
• Top speed: 38+ mph (62 kph achievable with 3S under optimal conditions)

Usage Recommendations

For drifting practice start with the gyro set near the recommended 75% to get predictable tail flicks and smoother corrections. Use the included bald tires for low-grip slides on smooth surfaces, then change to high-grip rubber when you want pointed lap times on tarmac. Consider upgrading to a 3S LiPo and matching battery mount if seeking the manufacturer-stated 62 kph performance, and ensure compatible connectors and mounting space.

In situations with rough terrain or heavier impacts, the oil-filled shocks and pre-mounted sponge inserts in the tires reduce vibration and help maintain control. Expect the vehicle to feel more responsive as you tune spring rates and shock damping, and keep ventilation clear around the motor heatsink and fans to avoid thermal throttling during long runs.

Technical Details

• Drivetrain: 4WD with metal differential
• Chassis material: 6061 aluminum alloy
• Bearings: 16 ball bearings for reduced friction
• Lights: Full vehicle lighting with simulated brake and turn signals, flash and continuous modes available.