Nilight Hitch Cargo Carrier Oval Light Kit 2pcs 6" Red 🚚

This hitch cargo light kit with 6 inch oval lights adds bright, clear signaling for luggage racks, bike racks, and cargo carriers on trucks and trailers. Designed for 12V DC systems, the two lights provide rear visibility for braking and turning, helping other drivers see your load in daytime and at night. This kit is built to handle weather and rough road conditions while keeping a clean, flush-mounted look on the mounting surface.

The lighting system is based on 10 high quality LED chips per light, delivering a strong red signal while the aluminum substrate helps stabilize the circuit for reliable operation. The lens and lamp body are sealed with ultrasonic bonding to achieve a high level of waterproofing, aiming for IP67 protection. The compact, durable design fits a variety of hitch platforms and cargo setups without adding excessive bulk to the rear.

Key Points

Nilight Hitch Cargo Carrier Oval Light Kit 2PCS 6Inch provides a two light setup with a simple installation path. The mounting bracket accepts a 0.39 inch diameter hole and the wiring harness uses a 3-prong plug to connect to the lights, with a 4-pin flat plug on the other end to connect to the vehicle. The design includes “ears” on the light housing and reinforced grommet notches to prevent separation during rough use. An extended 82.68 inch wire harness gives flexibility for routing and positioning around a cargo rack 🚚. You can expect consistent red illumination for turn and tail signals, and the system is suitable for universal 12V four-wire vehicle configurations 🛠️.

This option is useful for trailers, trucks, and cargo carriers where extra signaling is desired. The compact profile keeps the appearance tidy while maintaining visibility in varied weather. If you need a dependable, weather resistant signaling solution for rear-mounted cargo, this kit offers straightforward wiring and robust construction for everyday use.

Technical Specifications

• Name: Nilight Hitch Cargo Carrier Oval Light Kit 2PCS 6Inch
• Voltage: 12V DC
• Light type: LED, red signaling
• Waterproof rating: IP67 level
• Connector: 3-prong plugs at one end, 4-pin flat at the other end
• Harness length: 82.68 inches
• Material: aluminum substrate with integrated circuitry
• Mounting hole diameter: 0.39 inches

Usage Recommendations

For installation, attach the bracket in a suitable position on the hitch or cargo carrier and secure the light assembly. Route the wiring harness along the frame, keeping the 4-pin connector accessible for vehicle connection. Ensure the connections are firmly seated and there is no pinch point in the wire run. Consider testing the lights in a low light setting to confirm visibility during braking and turning. The lights are designed to withstand outdoor conditions, but avoid striking the lenses with sharp impacts to preserve sealing. If you’re upgrading a trailer or bike rack setup, this kit can be a practical, weather resistant lighting upgrade.