Geowaky 2-Inch x 100-Foot Pool Backwash Hose, Reinforced PVC Lay-Flat

A pool backwash hose needs to reach a suitable drain point and connect securely, a shorter or narrower hose may be easier to handle but won’t offer the same stated reach. The Geowaky hose is a 100-foot lay-flat discharge hose with a 2-inch inside diameter, intended for pool filter backwashing and other water-draining tasks.

Its reinforced PVC construction and included metal clamp are relevant if you want a hose that can be rolled up between uses and attached to a compatible outlet. One practical consideration is that buyers report occasional kinking that can restrict flow, so routing the hose without sharp bends matters.

Strengths

The 100-foot length gives you room to direct discharge away from a pool or work area, while the lay-flat design is intended to make storage less bulky than a rigid pipe. The hose has a 2-inch inside diameter and a listed flat width of 3.4 inches. Its PVC body is reinforced with polyester yarn, and the stated maximum working pressure is 90 psi.

The product is described for backwashing pool filters, draining pools, and use with sump, sewage, trash, and sand-filter pumps. That range may suit someone who wants one discharge hose for more than seasonal pool maintenance. Buyers also describe the material as sturdy and say it works for backwashing and moving water away from patios. Some report a good fit on drain pipes, though compatibility depends on the connection dimensions.

Quick overview

• Type: Lay-flat water discharge and pool backwash hose
• Inside diameter: 2 inches
• Length: 100 feet
• Flat width: 3.4 inches
• Material: PVC reinforced with polyester yarn
• Maximum working pressure: 90 psi
• Included: Metal clamp

The listed fit is for 2-inch hose adapters and Schedule 40/80 PVC pipe 1.5 inches or smaller, the pipe’s outside diameter must not exceed 2 inches. A larger pipe requires an adapter. These measurements are more useful for checking a planned connection than relying on the general “pool hose” label alone.

Everyday use

For a backwash cycle, the hose can be attached at the filter outlet and routed to an appropriate discharge area, with the clamp used to secure the connection. Its length can help when the drain point is not close to the pool, but a long flexible hose still needs a clear path. Avoid tight turns where possible: some buyers say the hose kinks and restricts water flow, a practical drawback to consider if your setup requires a sharply curved route.

After use, the lay-flat format can be rolled for storage. The product description also lists a temperature range of 23°F to 149°F (-5°C to 65°C), but does not provide a specific storage or cleaning routine. Worth considering if you need a long hose for pool discharge as well as occasional pumping or irrigation. Better avoided if your installation depends on maintaining a tight bend throughout the run.

Questions before you buy

Will it connect to a 2-inch hose adapter? The listed inside diameter is 2 inches, and the product is described as fitting 2-inch hose adapters. Check the dimensions of your outlet and connection before choosing it.

Can it fit smaller Schedule 40/80 PVC pipe? The stated fit covers pipe 1.5 inches or smaller, provided its outside diameter does not exceed 2 inches. A larger outside diameter calls for an adapter.

What do buyers say about handling and performance? Buyers commonly describe it as useful for backwashing and water discharge, and some praise its sturdy feel. Feedback is not uniformly positive: reports of kinking and restricted flow suggest that routing can affect day-to-day use.

Final verdict

The Geowaky is a reasonable match for pool owners who need a 100-foot, 2-inch lay-flat hose and can route it with broad, uncomplicated turns. Its stated pressure rating, reinforced construction, and clamp address basic connection and discharge needs, while the pipe-size limits are important to fit. If your setup calls for frequent tight bends, a hose with handling characteristics suited to that route may be a better fit.