FILN Rocker Switch 30A
Product description
For a vehicle panel, boat project, or DIY control box, a panel-mounted switch can make a power circuit easier to operate without adding a bulky control. This FILN KCD4 rocker switch is listed as a two-piece set with a red LED, a 30A rating, and an IP65 waterproof rating.
The listing names a 110V version, but the supplied product details also describe other voltage variants. Check that the version you receive matches your circuit before installation.
Getting the most from it
This switch is designed to snap into a 30x22mm panel cutout. That format makes it worth considering when you are replacing a compatible rocker or building a panel with a matching opening, it is not a universal fit for every existing hole. The description says spring clips hold it in place, so a prepared cutout matters more than having extra mounting hardware.
A practical use would be fitting it into a boat’s control panel, then using the illuminated red rocker to identify the on/off control at a glance. The IP65 rating is relevant where dust or water spray may reach the panel, but it should not be treated as permission to submerge the switch. Use appropriate wiring and installation practices for the circuit.
If you prioritize a compact snap-in switch with an illuminated actuator, this format may suit the job, if you prefer a screw-mounted control or need a switch with clearly documented terminals and wiring, those details are not provided here. It’s a great fit if your panel opening matches and the electrical rating is right for your setup.
Why it’s worth it
The appeal is straightforward: a 30A rating, an on/off rocker, a red LED, and a stated IP65 rating in a panel-mount format. The set includes two switches, which can be useful for a project with separate controls or as a spare. The description also identifies silver-alloy contacts and a PA66 internal housing, though it does not provide installation instructions or a wiring diagram to help confirm how the switch should be connected.
There is a notable version mismatch to keep in mind. The product name calls out 110V, while the description discusses both 12–24VAC and 110/250VAC versions, as well as several actuator finishes. The named red aluminum alloy variant is the clearest clue to the item being offered, but check the exact voltage and finish before using it. On the spec sheet, the IP65 rating speaks to protection from dust and water spray, not every marine exposure or installation condition.
At a glance
- Type: KCD4 on/off rocker switch
- Set: Two switches
- Rating: 30A, the product name specifies 110V
- Protection: IP65, as stated in the listing
- Indicator: Red LED
- Panel cutout: 30x22mm
- Named finish: Red aluminum alloy
These details make it easier to compare with a basic, unlit switch: the LED can help make the control visible, while the panel cutout and voltage version still need to match your build. The listing does not state terminal layout or give a wiring guide, so this is a less straightforward choice for anyone who needs those specifics before buying. It may not suit you if you need confirmed compatibility with a particular appliance or a fully specified wiring plan.
Final verdict
Consider the FILN if you need a two-piece, illuminated KCD4 rocker switch for a panel with a 30x22mm opening and can verify that the supplied voltage version matches your circuit. The stated IP65 protection and snap-in mounting are useful for compact vehicle, boat, or DIY control panels. Choose a different approach if your panel needs screw mounting, if the cutout differs, or if you cannot confirm the switch’s wiring and voltage details for the job.