ELEGOO PLA Plus 2.2 lb spools, 4-pack

This PLA Plus filament pack from ELEGOO brings brighter color choices and dimensional consistency for hobbyist and prototyping 3D printing. The PLA Plus 1.75mm filament spool pack offers a balance of strength and ease of use, making it suitable for detailed prints and everyday models according to the manufacturer.

Key Points

The pack contains four 2.2 pound spools in orange, yellow, sea green and sky blue, giving a total of 8.82 pounds of filament for longer print sessions and multiple projects. Filament quality focuses on consistent extrusion and layer adhesion, which helps reduce print failures and rework. 🎨

This PLA Plus formulation aims to deliver slightly higher impact resistance than standard PLA while retaining low-warp behavior that most FDM printers expect. The filament is ready to use with common print temperatures for PLA type materials. ⚙️

A practical nuance to consider is that PLA Plus can be a bit more brittle than engineering plastics at high stress points, so parts subjected to repeated bending may benefit from alternative materials. Also, like other PLA variants, it remains sensitive to moisture and should be stored in a dry place to preserve printability.

Technical Specifications

• Name: ELEGOO PLA Plus 1/16 inch (1.75 mm) 8.82 lb Pack
• Diameter: 1.75 mm
• Tolerance: ±0.02 mm
• Total weight: 8.82 lb (4 x 2.2 lb spools)
• Colors included: orange, yellow, sea green, sky blue
• Material: PLA Plus, for FDM 3D printers

Usage Recommendations

For best results, print at temperatures commonly used for PLA family filaments, and adjust nozzle and bed settings according to your printer and part geometry. Drying the filament before printing can improve flow and reduce stringing after the spool has been exposed to humid storage. 🔧

When printing fine details, reduce print speed and enable cooling fans to improve bridging and overhang performance. For parts that need added toughness, increase wall count and infill percentage rather than relying solely on higher extrusion temperature. Monitoring first-layer adhesion and calibrating extrusion multiplier will help keep dimensional accuracy within the stated tolerance of ±0.02 mm.

If color consistency across spools matters for a multi-spool project, test a short calibration print for each spool before committing to a long print run. Some printers may require slight retraction tuning to minimize oozing or blobs when switching between these bright, glossy filaments.