Dopro HTL582-Dopro 8-Hole Tele Humbucker Pickguard, Mint Green 3-Ply

The mint green, 3-ply finish gives this Tele humbucker pickguard a defined look while providing a replacement part made for USA/Mexican Standard Telecasters. Its 8-hole layout and approximately 2.2 mm plastic construction make it a practical choice when you want to refresh a compatible guitar with a pickguard designed for a humbucker pickup.

If your priority is a pickguard for a USA/Mexican Standard Telecaster, this model is built around that fit. A different Tele-style guitar may call for an adjusted fit, so this is a more targeted choice than a universal replacement.

Product specs

• Brand: Dopro
• Model: HTL582-Dopro
• Type: 8-hole Tele humbucker pickguard
• Color: Mint Green 3 Ply
• Material: Plastic
• Thickness: About 2.2 mm, with a stated variation of ±0.2 mm
• Humbucker pickup mounting holes: 2
• Included: Pickguard mounting screws

The two screw holes for the humbucker pickup are a useful detail to factor into a replacement or setup. The pickguard also has protective plastic film, peel it off after installation for the finished surface. Its mint green, three-ply appearance adds a distinct visual change while keeping the choice focused on a specific Telecaster style rather than a generic pickguard.

Everyday compatibility

This pickguard fits USA/Mexican Standard Fender Telecasters. It does not fit Fender Squier Teles or other Tele types as a direct fit, another type may require a small modification. Because pickguards vary, compare the dimensions and mounting-hole layout with your existing pickguard before ordering. That simple fit check is especially useful when replacing a part on a guitar whose exact version or hole pattern is uncertain.

For a guitar that matches the stated USA/Mexican Standard fit, the pickguard offers a direct replacement approach with mounting screws included. If the guitar is a different Tele variant, choosing a part made specifically for that model is the more practical route. The distinction matters because matching the pickup opening alone does not establish that the full pickguard layout will fit.

Who it’s for

This Dopro pickguard is suited to players updating the appearance of a compatible Telecaster or replacing an existing humbucker pickguard. The mint green 3-ply finish makes the visual change clear, while the plastic construction and stated thickness provide useful details for comparing it with the part already on the guitar. It can also suit a repair or setup project where the guitar’s fit and screw-hole layout have been identified in advance.

Before you decide

Which guitars does this pickguard fit? It is made for USA/Mexican Standard Fender Telecasters. It is not a direct fit for Fender Squier Teles or other Tele types, though another type may fit with a small modification.

How thick is the pickguard? It is about 2.2 mm thick, with a stated variation of ±0.2 mm. Comparing this measurement and the dimensions of your current pickguard can help you assess the replacement.

Are mounting screws included, and what about the protective film? Pickguard mounting screws are included. The plastic film on the pickguard should be peeled off after installation.

Final verdict

For a USA/Mexican Standard Telecaster that matches its layout, this Dopro pickguard brings together a mint green 3-ply look, a humbucker design, and included mounting screws. It’s a focused replacement choice for a guitar refresh or repair where the fit has been matched to the instrument.